using System; using System.Collections.Generic; using System.Globalization; using System.IO; using System.Text; using UnityEditor; using UnityEditor.SceneManagement; using UnityEngine; namespace ServiceSim.Closeups.EditorTools { /// /// 依頼237:⑨(235)のやり取りを 2 本で分けて作り直した。Closeup235.cs を写して、写した先で変えた。台本は closeup237_script.json(make_script237.py)。場面の名前は 235 と同じ stop_voice・stop_stuck(まばたきの種が同じになる)。 /// 235 から変えたこと: /// ・画面の stuck:帯(黄)「通れません」だけの絵 c237_stuck_band.png を重ね、顔の板は困り顔 face237_trouble(ふだんの大きさ。ほかの帯の時と同じ顔の板) /// ・画面は台本の c237.screen の時刻のとおり(happy・face も台本から)。235 の「走り出したら目まで笑う顔 1.5 秒」はやめた(走り出しの時刻は 1 回目の Unity の値を台本に入れる) /// ・目まで笑う顔は 224 と同じ(face224_happy_<口>。ハコブくんが話す間も口が動く) /// ・ハコブくんが車いすの横にいる間(前の端が足のせの前の端を過ぎてから、後ろの端が大城さんの後ろの端を過ぎるまで)の時刻を events237.txt と check237.txt に書く /// 以下は 235 の説明: /// 依頼235:⑨「車いすが廊下の真ん中で止まる」(⑩入り)。場面 stop_voice(⑨-1)・stop_stuck(⑨-2)。Closeup234.cs を写して、写した先で変えた。台本は closeup237_script.json(make_script235.py)。 /// 234 から変えたこと: /// ・寺島さん(Models_terashima/NurseTerashima.prefab)を置き、2 つめの CloseupDirector で台本の場面 <場面>__tera を動かす(部品の名前 Terashima_ を Nurse_ に替えて CloseupNurse を付ける。共通の部品は変えない) /// ・車いすの根の位置・向きは台本の c235.chair(毎コマ)。両手で握っている間は大城さんの根の前に固く付いた値、立ち話の間は止めた所 /// ・ハコブくんの決まりに足した:止まった後、前の物(車いす・茂さん・大城さん・寺島さん)が resume_still_s 秒動かず、寄った位置で gap_stop_m 以上あけて通れる時に走り出す。 /// 寄った位置(x −0.4643)のまま通り、物の一番後ろを通り過ぎてから x −0.33 へ戻る(依頼235 の答え 3) /// ・画面:c235.screen(face・wait・deliv・pass・stuck・happy)。輪:c235.ring の wait の間は待つ色(203 と同じ作り) /// ・真上のもの別の型 frames/<場面>_top_obj は RGBA(赤=ハコブくん・緑=車いすと茂さん・青=大城さん・アルファ=寺島さん) /// ・確かめを足した:寄せる道(向き・速さ・向きの変わる速さ・前へ/後ろへ・足のせとハコブくん・車輪の横すべり)、大城さんの体と顔の向き・握りをはなした/握り直した時刻、 /// ハコブくんが通る時の車いす・大城さん・寺島さんとのすき間の最小、寺島さんの当たり /// 以下は 234 の説明: /// 依頼234:232 の体の型に加えて、もの(ハコブくん/車いすと茂さん/大城さん)ごとに別々に白く写した型を撮る(Closeup232.cs を写して、写した先で変えた)。 /// frames/yield_top_obj/f_*.png は 1 枚の色の型で、赤=ハコブくんだけ・緑=車いすと茂さんだけ・青=大城さんだけを写したもの(3 回別々に撮るので、ほかのものに隠された所も入る)。 /// make234.py が、ものごとに中の穴を埋めた外形にしてから床の線を消す。真上のコマと 232 と同じ型(frames/yield_top_mask)は 232 のまま撮る。 /// 以下は 232 の説明: /// 依頼232:230 の真上の動画の床の線(中心・+0.28・+0.42・−0.33 の線と線の端の字)を、ハコブくん・大城さん・茂さん・車いすの下に描く。Closeup230.cs を写して、写した先で変えた。 /// 動き・カメラ・真上のコマは 230 のまま。足したのは、真上のコマごとに「体だけを白く写した型」frames/yield_top_mask/f_*.png(黒=床・白=体)を撮ることだけ。 /// 型は真上のカメラを写した別のカメラ(MaskCam232)で、体の部品だけを層 LayerMask232 に移し、白の Unlit/Color で写す(影・光は写らない)。写した後に層と材料を元に戻す。 /// make232.py が床の線の層を、この型の白い所で消してから重ねる(線は床の上・体の下に見える)。 /// 以下は 230 の説明: /// 依頼230:229 の真上の動画を、車いすがどこにいてどう動いたか分かる形に撮り直す。Closeup229.cs を写して、写した先で変えた。 /// 台本は 229 の closeup229_script.json をそのまま読む(動き・時刻・セリフは 229 のまま)。変えたのは次だけ: /// ・真上のカメラ:closeup230_top.json の動かない真上のカメラ(正射影・廊下の長い向きが画面の横)。他のカメラは 229 のまま(正射影を戻す) /// ・コマごとに top237.csv を出す:車いすの後ろの車軸の真ん中(左右の後ろの車輪の中心の真ん中)・ハコブくんの根の、廊下の原点からの x・z と真上の画面の位置(ピクセル)、 /// 車いす(頂点)・ハコブくん(外形の四隅)・大城さん(骨)が真上の画面の中か(2=全部・1=一部・0=外) /// ・top237_cam.json:真上のカメラの値と、床の点(x・z)から画面の位置への写し方(Unity のカメラで 3 点を写した値) /// ・既定は真上だけ撮る(-c237Views top)・静止画なし(-c237Stills off)。目印・跡・字は make230.py で重ねる /// 以下は 229 の説明: /// 依頼229:⑧「車いすに道を譲る」(228)で、車いすを x +0.28 から始め、ハコブくんが寄り始めたのを見て大城さんが x +0.42 へ寄せる。 /// 228 の Closeup228.cs を写して、写した先で変えた。228 から変えたのは次だけ(車いすを寄せる道・大城さんの根と向きは台本 closeup229_script.json の nurse.x・z・yaw。 /// 車いすは 228 と同じく大城さんの根の前に固く付けて動かすので、向きも大城さんと一緒に変わる。前の車輪は 228 の引っぱりの形のまま): /// ・茂さん・車いすの読み込みの設定は確かめるだけ(Models/ に書かない。228 の Closeup228Morita.Import は呼ばない。違えば止める) /// ・カメラの follow "nurse_xz":pos・look を大城さんの根の位置と向きから(確かめの静止画用) /// ・確かめを足した:車いすの横の位置・向き、寄せる間(c229.shift.t0〜t1)の手と握り・車輪の横すべり・前の車輪の向き・足のすべり、 /// 車いすの前の端がハコブくんの前の端と並んだ時刻、寄せ始める前のすき間の最小、車いすの横の速さ(根・足のせの前の端) /// 以下は 228 の説明: /// 依頼228:要所の場面 ⑧「車いすに道を譲る」(場面 yield・声あり)。217 の Closeup217.cs(175 の CloseupCorridor.cs の写し)を写して、写した先で変えた。 /// 廊下(台本の rooms の「廊下…」)・看護師の歩き・顔の向き・口・確かめの作りは 217 のまま。足したもの: /// ・車いす(Models/Morita/wheelchair.fbx)を看護師の根の前 c228.wc_ahead_m に固く付けて動かす。後ろの車輪は進んだ長さ ÷ 0.28 m、 /// 前の車輪は支柱が引っぱる形(後ろへ付いていく)で向きを変え、進んだ長さ ÷ 0.075 m だけ回す /// ・森田茂さん(morita_shigeru.fbx・Generic)は車いすの子。顔の向き・うなずき(Neck と Head の骨)・口(Morita_Mouth_*)・まばたき(Eye_L/R) /// ・ハコブくんの決まり(robot_rule):前から来る物(車いす・茂さん・看護師)が「自分が止まるまでに縮まる距離+余り margin_m」を切ったら、 /// ふだんの横の位置ですれ違う時のすき間(予想)が gap_stop_m より狭ければ「止まる」(slow_mps に落としながら左の手すり側へ寄り、残りが lateral_done_m を切ったら止まり始める。止まるまで寄り続ける)、 /// gap_slow_m より狭ければ「寄る」。止まった後、看護師の体が自分の後ろの端から pass_behind_m 以上離れたら、ふだんの横の位置へ戻りながら走り出す /// ・画面:顔の板はふだん「基本」。c228.band_on〜band_off は帯だけの絵(Textures/c228_yield_band.png)を重ねる(顔は顔の板のふだんの大きさ。219・223 と同じ)。 /// 話す口は顔の板の絵 face218_<口>(mid はもとの絵)。c228.happy_from〜happy_to は目まで笑う顔 face218_happy(224 と同じ) /// 場面(Closeup_Handover.unity)は保存しない。台本の場面の値は "c229"(228 の "c228" と同じ中身+shift) /// /// コマンド Unity -batchmode -quit -projectPath … -executeMethod ServiceSim.Closeups.EditorTools.Closeup237.Run \ /// -c237Out <出力フォルダ> [-c237Script closeup229_script.json] [-c237Frames on|off] [-c237Stills on|off] [-c237Views main,top] [-c237From 秒] [-c237To 秒] [-c237Until 秒(試しに途中まで)] /// 出すもの:frames/yield/f_*.png・frames/yield_top/f_*.png・stills/・stills_check/・frames237.csv・bones237.csv・feet237.csv・wc237.csv・check237.txt・events237.txt /// public static class Closeup237 { const string Root = CloseupShoot.Root; const string TexDir = CloseupShoot.TexDir; static readonly CultureInfo IC = CultureInfo.InvariantCulture; static string F(float v, string f = "0.0000") { return v.ToString(f, IC); } const int LayerChair = 30, LayerNurse = 31; const int LayerMask232 = 29; // 依頼232:体の型を写す間だけ体の部品を置く層 // ---------------------------------------------------------------- ハコブくんの形(217 と同じ) class RobotShape { public float band = 0.02f, top, minX, maxX, minZ, maxZ; public List hulls = new List(); public Vector2[] all; public Vector3[] verts; } static Vector2[] Hull(List p) { if (p.Count < 3) return null; p.Sort((a, b) => a.x != b.x ? a.x.CompareTo(b.x) : a.y.CompareTo(b.y)); var h = new Vector2[p.Count * 2]; int k = 0; Func cr = (o, a, b) => (a.x - o.x) * (b.y - o.y) - (a.y - o.y) * (b.x - o.x); for (int i = 0; i < p.Count; i++) { while (k >= 2 && cr(h[k - 2], h[k - 1], p[i]) <= 0) k--; h[k++] = p[i]; } for (int i = p.Count - 2, t = k + 1; i >= 0; i--) { while (k >= t && cr(h[k - 2], h[k - 1], p[i]) <= 0) k--; h[k++] = p[i]; } var r = new Vector2[k - 1]; Array.Copy(h, r, k - 1); return r; } static float PolyDist(Vector2[] poly, Vector2 q) { bool inside = true; float best = float.MaxValue; for (int i = 0; i < poly.Length; i++) { Vector2 a = poly[i], b = poly[(i + 1) % poly.Length]; Vector2 e = b - a; if (e.x * (q.y - a.y) - e.y * (q.x - a.x) < 0) inside = false; float u = Mathf.Clamp01(Vector2.Dot(q - a, e) / Mathf.Max(1e-12f, e.sqrMagnitude)); best = Mathf.Min(best, (a + e * u - q).sqrMagnitude); } return inside ? 0f : Mathf.Sqrt(best); } static RobotShape MeasureRobot(CloseupDirector dir) { var rs = new RobotShape(); var pts = new List(); foreach (var mf in dir.robot.GetComponentsInChildren(true)) { if (dir.screenOverlay != null && mf.gameObject == dir.screenOverlay.gameObject) continue; if (!mf.gameObject.activeInHierarchy || mf.sharedMesh == null) continue; foreach (var v in mf.sharedMesh.vertices) pts.Add(dir.robot.InverseTransformPoint(mf.transform.TransformPoint(v))); } rs.verts = pts.ToArray(); rs.top = float.MinValue; rs.minX = rs.minZ = float.MaxValue; rs.maxX = rs.maxZ = float.MinValue; foreach (var p in pts) { rs.top = Mathf.Max(rs.top, p.y); rs.minX = Mathf.Min(rs.minX, p.x); rs.maxX = Mathf.Max(rs.maxX, p.x); rs.minZ = Mathf.Min(rs.minZ, p.z); rs.maxZ = Mathf.Max(rs.maxZ, p.z); } int nb = Mathf.CeilToInt(rs.top / rs.band) + 1; var bl = new List[nb]; for (int i = 0; i < nb; i++) bl[i] = new List(); var al = new List(); foreach (var p in pts) { int b = Mathf.Clamp(Mathf.FloorToInt(p.y / rs.band), 0, nb - 1); bl[b].Add(new Vector2(p.x, p.z)); al.Add(new Vector2(p.x, p.z)); int b2 = Mathf.Clamp(Mathf.FloorToInt((p.y + 0.005f) / rs.band), 0, nb - 1); if (b2 != b) bl[b2].Add(new Vector2(p.x, p.z)); b2 = Mathf.Clamp(Mathf.FloorToInt((p.y - 0.005f) / rs.band), 0, nb - 1); if (b2 != b) bl[b2].Add(new Vector2(p.x, p.z)); } for (int i = 0; i < nb; i++) rs.hulls.Add(Hull(bl[i])); for (int i = 0; i < nb; i++) if (rs.hulls[i] == null) { var m = new List(); for (int j = i - 1; j >= 0; j--) if (rs.hulls[j] != null) { m.AddRange(rs.hulls[j]); break; } for (int j = i + 1; j < nb; j++) if (bl[j].Count >= 3) { m.AddRange(Hull(new List(bl[j]))); break; } rs.hulls[i] = Hull(m); } rs.all = Hull(al); return rs; } static float RobotDist(RobotShape rs, Vector3 p, float cut) { Vector2 q = new Vector2(p.x, p.z); float dAll = PolyDist(rs.all, q); float dyTop = Mathf.Max(0f, p.y - rs.top), dyBot = Mathf.Max(0f, -p.y); if (Mathf.Sqrt(dAll * dAll + Mathf.Max(dyTop, dyBot) * Mathf.Max(dyTop, dyBot)) > cut) return float.MaxValue; float best = float.MaxValue; int b0 = Mathf.FloorToInt((p.y - cut) / rs.band), b1 = Mathf.FloorToInt((p.y + cut) / rs.band); for (int b = Mathf.Max(0, b0); b <= Mathf.Min(rs.hulls.Count - 1, b1); b++) { if (rs.hulls[b] == null) continue; float y0 = b * rs.band, y1 = y0 + rs.band; float dy = p.y < y0 ? y0 - p.y : p.y > y1 ? p.y - y1 : 0f; if (dy >= best) continue; float dh = PolyDist(rs.hulls[b], q); best = Mathf.Min(best, Mathf.Sqrt(dh * dh + dy * dy)); } return best; } class SolidBox { public string name; public Vector3 min, max; public bool rail; } static float PointBoxDist(Vector3 p, Vector3 mn, Vector3 mx) { Vector3 q = new Vector3(Mathf.Clamp(p.x, mn.x, mx.x), Mathf.Clamp(p.y, mn.y, mx.y), Mathf.Clamp(p.z, mn.z, mx.z)); return Vector3.Distance(p, q); } static bool InBox(Vector3 p, Vector3 mn, Vector3 mx) { return p.x > mn.x && p.x < mx.x && p.y > mn.y && p.y < mx.y && p.z > mn.z && p.z < mx.z; } // ---------------------------------------------------------------- 前から来る物(車いす・茂さん・看護師)の見え方 class Obs { public float t; public float nearRel; // 物の頂点の x から、同じ高さのハコブくんの右の幅を引いた値の一番小さい所(ハコブくんの根の x を引けば横のすき間) public float nearZ; // 一番前(−z の側)の z(足のせの前の端) public float nurseFarZ; // 看護師の体の一番後ろ(+z の側)の z public float farZ; // 物の一番後ろの z } class Rule { public float cruise, slow, accel, decel, jerk, detectRange, react, margin, gapSlow, gapStop; public float laneX, wallClear, latMax, latAngle, latAccel, kx, latDone, resumeAngle, passBehind, turnRate, halfLen, slack; } static Rule ReadRule(JsonValue j) { return new Rule { cruise = j["cruise_mps"].F(0.6f), slow = j["slow_mps"].F(0.3f), accel = j["accel_max_mps2"].F(0.4f), decel = j["decel_max_mps2"].F(0.4f), jerk = j["jerk_max_mps3"].F(1f), detectRange = j["detect_range_m"].F(6f), react = j["react_s"].F(0.1f), margin = j["margin_m"].F(2.4f), gapSlow = j["gap_slow_m"].F(0.4f), gapStop = j["gap_stop_m"].F(0.15f), laneX = j["lane_x"].F(-0.33f), wallClear = j["wall_clear_m"].F(0.053f), latMax = j["lateral_max_mps"].F(0.12f), latAngle = j["lateral_angle_deg"].F(15f), latAccel = j["lateral_accel_mps2"].F(0.25f), kx = j["lateral_gain"].F(2f), latDone = j["lateral_done_m"].F(0.005f), resumeAngle = j["resume_lateral_angle_deg"].F(10f), passBehind = j["pass_behind_m"].F(1f), turnRate = j["turn_rate_dps"].F(30f), halfLen = j["corner_half_len_m"].F(0.38f), slack = j["corner_slack_m"].F(0.004f), }; } /// 速さ:加速度は accel/decel まで・加加速度は jerk まで(217 と同じ) static void StepSpeed(ref float rv, ref float ra, float vT, Rule R, float dt) { float dvT = vT - rv; float aD = Mathf.Abs(dvT) < 1e-6f ? 0f : Mathf.Sign(dvT) * Mathf.Min(dvT > 0f ? R.accel : R.decel, Mathf.Sqrt(2f * R.jerk * Mathf.Abs(dvT))); ra = Mathf.MoveTowards(ra, aD, R.jerk * dt); float rvNew = rv + ra * dt; if (Mathf.Abs(dvT) > 1e-6f && (Mathf.Sign(vT - rvNew) != Mathf.Sign(dvT) || Mathf.Abs(vT - rvNew) < 0.001f)) { rvNew = vT; ra = 0f; } rv = Mathf.Max(0f, rvNew); } /// 横:向き th(度)を持って進む(横の速さ=速さ×tan(向き))。向きは ang まで・変わる速さは turn_rate まで、 /// 手すりの側の角が手すりへ振れないように、寄った位置 xWall からの余り(+slack)で決まる角度 asin(余り/half_len) まで。 /// 向きの目標は、横の目標 xT へ着く所で止まれる横の速さ(√(2·横の加速度·残り)・残り×gain・latMax まで)から static void StepLat(ref float rx, ref float th, float xT, float rv, float ang, Rule R, float dt, float xWall) { if (rv <= 1e-4f) return; // 止まっている間は向きも変えない(その場で回らない) float dx = xT - rx; float vdes = Mathf.Sign(dx) * Mathf.Min(Mathf.Min(Mathf.Abs(dx) * R.kx, Mathf.Sqrt(2f * R.latAccel * Mathf.Abs(dx))), R.latMax); float thd = rv > 1e-4f ? Mathf.Atan2(vdes, rv) * Mathf.Rad2Deg : 0f; float clear = Mathf.Asin(Mathf.Clamp01((rx - xWall + R.slack) / R.halfLen)) * Mathf.Rad2Deg; float lim = Mathf.Min(ang, clear); thd = Mathf.Clamp(thd, -lim, lim); th = Mathf.MoveTowards(th, thd, R.turnRate * dt); th = Mathf.Clamp(th, -Mathf.Max(lim, 0f), Mathf.Max(lim, 0f)); rx += rv * Mathf.Tan(th * Mathf.Deg2Rad) * dt; } /// 止まるまでの見込み:今から「寄って止まる」をしたら、止まるまでの時間と進む長さ(自分の決まりで先を計算) static void PlanStop(float rv, float ra, float rx, float th, float xWall, Rule R, float dt, out float tm, out float dm) { tm = 0f; dm = 0f; bool latDone = false; for (int i = 0; i < 3000; i++) { float vT = latDone ? 0f : R.slow; StepSpeed(ref rv, ref ra, vT, R, dt); StepLat(ref rx, ref th, xWall, rv, R.latAngle, R, dt, xWall); if (!latDone && Mathf.Abs(xWall - rx) < R.latDone) latDone = true; tm += dt; dm += rv * dt; if (latDone && rv <= 0f) return; } } public static void Run() { string outDir = CloseupArgs.Get("-c237Out", ""); if (outDir == "") throw new Exception("-c237Out がない"); string scriptName = CloseupArgs.Get("-c237Script", "closeup237_script.json"); string shotArg = CloseupArgs.Get("-c237Shot", "stop_voice"); bool frames = CloseupArgs.Get("-c237Frames", "off") == "on"; bool stillsOn = CloseupArgs.Get("-c237Stills", "off") == "on"; var views = new HashSet(CloseupArgs.Get("-c237Views", "top").Split(',')); float fromT = float.Parse(CloseupArgs.Get("-c237From", "-1"), IC), toT = float.Parse(CloseupArgs.Get("-c237To", "1e9"), IC); Directory.CreateDirectory(outDir); var log = new StringBuilder(); var tab = new StringBuilder(); try { CheckImport(log); EditorSceneManager.OpenScene(CloseupShoot.ScenePath, OpenSceneMode.Single); var dir = UnityEngine.Object.FindObjectOfType(); dir.LoadScript(File.ReadAllText(Path.IsPathRooted(scriptName) ? scriptName : Root + "/" + scriptName)); var js = dir.script; string topErr; var topJs = JsonValue.Parse(File.ReadAllText(Root + "/closeup230_top.json"), out topErr); if (topJs == null) throw new Exception("closeup230_top.json: " + topErr); // 依頼230:動かない真上のカメラ dir.nurse.Init(); dir.Measure(); dir.BuildOverlay(); dir.MeasurePocket(); // ---- 廊下(217 と同じ) var solids = new List(); var corr = new GameObject("Corridor230").transform; var mats = new Dictionary(); foreach (var k in js["colors"].Keys) { var m = new Material(Shader.Find("Standard")) { name = "C230_" + k }; Color c; ColorUtility.TryParseHtmlString(js["colors"][k].S(), out c); m.color = c; m.SetFloat("_Glossiness", 0.15f); mats[k] = m; } var rooms = js["rooms"]; int nCorr = 0; for (int i = 0; i < rooms.Count; i++) { var r = rooms[i]; if (!r["name"].S("").StartsWith("廊下")) continue; Vector3 a = CloseupDirector.V3(r["min"]), b = CloseupDirector.V3(r["max"]); var go = GameObject.CreatePrimitive(PrimitiveType.Cube); UnityEngine.Object.DestroyImmediate(go.GetComponent()); go.name = r["name"].S(); go.transform.SetParent(corr, false); go.transform.position = (a + b) * 0.5f; go.transform.localScale = b - a; var rr = go.GetComponent(); rr.sharedMaterial = mats[r["mat"].S()]; if (!r["shadow"].B(false)) rr.shadowCastingMode = UnityEngine.Rendering.ShadowCastingMode.Off; if (r["solid"].B(false)) solids.Add(new SolidBox { name = r["name"].S(), min = a, max = b, rail = r["rail"].B(false) }); nCorr++; } log.AppendLine("廊下の箱 " + nCorr + " 個(当たりを数える箱 " + solids.Count + " 個)"); // ---- 看護師:描くのは焼いた形(217 と同じ) var parts = new List(); foreach (var smr in dir.nurse.GetComponentsInChildren(true)) foreach (var n in new[] { "Nurse_Skin", "Nurse_Top", "Nurse_Sleeves", "Nurse_Pants", "Nurse_Shoes", "Nurse_Hair" }) if (smr.name == n) parts.Add(smr); var proxies = new List>(); var proxyRoot = new GameObject("Baked229").transform; Action addProxy = smr => { var g = new GameObject(smr.name + "_Baked"); g.transform.SetParent(proxyRoot, false); var mf = g.AddComponent(); mf.sharedMesh = new Mesh(); var mr = g.AddComponent(); mr.sharedMaterials = smr.sharedMaterials; smr.enabled = false; proxies.Add(new KeyValuePair(smr, mf)); }; foreach (var smr in dir.nurse.GetComponentsInChildren(true)) addProxy(smr); Action syncProxies = () => { foreach (var kv in proxies) { bool on = kv.Key.gameObject.activeInHierarchy; kv.Value.gameObject.SetActive(on); if (!on) continue; kv.Key.BakeMesh(kv.Value.sharedMesh, true); kv.Value.sharedMesh.RecalculateBounds(); kv.Value.transform.SetPositionAndRotation(kv.Key.transform.position, kv.Key.transform.rotation); } }; var partCat = new List(); var an = dir.nurse.Anim; var boneMap = new Dictionary(); for (int i = 0; i < (int)HumanBodyBones.LastBone; i++) { var tb = an.GetBoneTransform((HumanBodyBones)i); if (tb != null) boneMap[tb] = (HumanBodyBones)i; } foreach (var smr in parts) { var bw = smr.sharedMesh.boneWeights; var cat = new string[smr.sharedMesh.vertexCount]; for (int i = 0; i < cat.Length; i++) cat[i] = bw.Length > i ? HandCat(smr.bones[bw[i].boneIndex0], boneMap) : ""; partCat.Add(cat); } var bonesList = new List(); for (int i = 0; i < (int)HumanBodyBones.LastBone; i++) if (an.GetBoneTransform((HumanBodyBones)i) != null) bonesList.Add((HumanBodyBones)i); // 看護師の口(217・218 と同じ:talk を上の端を止めて縦に curMouthScale 倍) MeshFilter talkProxy = null; foreach (var kv in proxies) if (kv.Key.name == "Nurse_Mouth_talk" && kv.Key.transform.IsChildOf(dir.nurse.transform)) talkProxy = kv.Value; if (talkProxy == null) throw new Exception("看護師の口の部品 Nurse_Mouth_talk が無い"); float curMouthScale = 1f; Action scaleMouth = () => { if (!talkProxy.gameObject.activeSelf || Mathf.Abs(curMouthScale - 1f) < 1e-4f) return; var mesh = talkProxy.sharedMesh; var vs = mesh.vertices; Vector3 fw = dir.nurse.HeadForward().normalized; Vector3 upW = Vector3.ProjectOnPlane(Vector3.up, fw).normalized; Vector3 u = Quaternion.Inverse(talkProxy.transform.rotation) * upW; float top = float.MinValue; foreach (var v in vs) top = Mathf.Max(top, Vector3.Dot(v, u)); for (int i = 0; i < vs.Length; i++) { float h = Vector3.Dot(vs[i], u) - top; vs[i] -= u * (h * (1f - curMouthScale)); } mesh.vertices = vs; mesh.RecalculateBounds(); }; // ---- 依頼228:車いすと茂さん var chair = Closeup228Morita.Spawn(Closeup228Morita.ChairFbx, "Wheelchair229").transform; var mor = Closeup228Morita.Spawn(Closeup228Morita.MoritaFbx, "Morita229").transform; mor.SetParent(chair, false); mor.localPosition = Vector3.zero; mor.localRotation = Quaternion.identity; Func CF = n => { var t0 = CloseupNurse.Find(chair, n); if (t0 == null) throw new Exception("車いす・茂さんの部品が無い: " + n); return t0; }; Transform wheelL = CF("Wheel_L"), wheelR = CF("Wheel_R"), casL = CF("Caster_L"), casR = CF("Caster_R"), cwL = CF("CasterWheel_L"), cwR = CF("CasterWheel_R"); Transform mNeck = CF("Neck"), mHead = CF("Head"), mEyeL = CF("Eye_L"), mEyeR = CF("Eye_R"); var mMouths = new Dictionary(); foreach (var r in mor.GetComponentsInChildren(true)) if (r.name.StartsWith("Morita_Mouth_")) mMouths[r.name.Substring("Morita_Mouth_".Length)] = r.gameObject; // 車いすの根にそろえた時の、回す部品の向き(根から) chair.SetPositionAndRotation(Vector3.zero, Quaternion.identity); Quaternion wlRest = wheelL.localRotation, wrRest = wheelR.localRotation, clRest = casL.localRotation, crRest = casR.localRotation, cwlRest = cwL.localRotation, cwrRest = cwR.localRotation; Vector3 axWL = wheelL.parent.InverseTransformDirection(Vector3.right), axWR = wheelR.parent.InverseTransformDirection(Vector3.right); Vector3 axCL = casL.parent.InverseTransformDirection(Vector3.up), axCR = casR.parent.InverseTransformDirection(Vector3.up); Vector3 axCWL = cwL.parent.InverseTransformDirection(Vector3.right), axCWR = cwR.parent.InverseTransformDirection(Vector3.right); Vector3 hubL0 = wheelL.position, hubR0 = wheelR.position, stemL0 = casL.position, stemR0 = casR.position, cAxL0 = cwL.position, cAxR0 = cwR.position; Quaternion neckRest = mNeck.rotation, headRest = mHead.rotation; Vector3 eyeSL = mEyeL.localScale, eyeSR = mEyeR.localScale; // 当たりを数える形(車いすの部品ごとに MeshCollider) var chairMF = new List(chair.GetComponentsInChildren(true)); var chairCol = new Dictionary(); foreach (var mf in chairMF) { var mc = mf.gameObject.AddComponent(); mc.sharedMesh = mf.sharedMesh; mf.gameObject.layer = LayerChair; chairCol[mc] = mf.name; } // 車いすの頂点(根から)・タイヤの頂点 var chairVertsLocal = new List(); var chairVertsPart = new List(); foreach (var mf in chairMF) foreach (var v in mf.sharedMesh.vertices) { chairVertsLocal.Add(mf.transform.TransformPoint(v)); chairVertsPart.Add(mf.name); } float tireBot0 = float.MaxValue, cTireBot0 = float.MaxValue; foreach (var v in wheelL.GetComponent().sharedMesh.vertices) tireBot0 = Mathf.Min(tireBot0, wheelL.TransformPoint(v).y); foreach (var v in cwL.GetComponent().sharedMesh.vertices) cTireBot0 = Mathf.Min(cTireBot0, cwL.TransformPoint(v).y); var chairMin = Vector3.one * 9f; var chairMax = -Vector3.one * 9f; foreach (var p in chairVertsLocal) { chairMin = Vector3.Min(chairMin, p); chairMax = Vector3.Max(chairMax, p); } log.AppendLine(string.Format(IC, "車いす:頂点 {0}・範囲 {1}〜{2}・後ろの車輪の下 {3:0.0000}・前の車輪の下 {4:0.0000}", chairVertsLocal.Count, chairMin.ToString("0.000"), chairMax.ToString("0.000"), tireBot0, cTireBot0)); // 茂さん(焼いた形) var morParts = new List(mor.GetComponentsInChildren(true)); foreach (var smr in morParts) addProxy(smr); // 茂さんと車いす:座った形の確かめ(はじめに 1 回。体は根に固いので、顔を動かす骨のほかは動かない) var bakedM = new Mesh(); Physics.SyncTransforms(); { int touch = 0, inside = 0; float slipMin = float.MaxValue, seatMin = float.MaxValue; var sbM = new StringBuilder(); foreach (var smr in morParts) { if (!smr.gameObject.activeInHierarchy || smr.name.StartsWith("Morita_Mouth_")) continue; smr.BakeMesh(bakedM, true); var m = Matrix4x4.TRS(smr.transform.position, smr.transform.rotation, Vector3.one); int tp = 0; foreach (var v in bakedM.vertices) { var w = m.MultiplyPoint3x4(v); if (Physics.CheckSphere(w, 0.001f, 1 << LayerChair)) { touch++; tp++; } if (smr.name == "Morita_Slippers" && w.z > 0.42f && w.z < 0.64f) slipMin = Mathf.Min(slipMin, w.y); if (smr.name == "Morita_Pants" && Mathf.Abs(w.x) < 0.2f && w.z > -0.19f && w.z < 0.23f && w.y < 0.6f) seatMin = Mathf.Min(seatMin, w.y); } if (tp > 0) sbM.Append(" " + smr.name + " " + tp); } log.AppendLine(string.Format(IC, "茂さんと車いす(はじめ):車いすの面から 1 mm 以内の頂点 {0}({1})・足のせの上のスリッパの一番下 {2:0.0000} m(足のせの上の面 0.075)・クッションの上のズボンの一番下 {3:0.0000} m(クッションの上の面 0.485)", touch, sbM.ToString().Trim(), slipMin, seatMin)); tab.AppendLine(string.Format(IC, "茂さんと車いす\t車いすの面から 1 mm 以内の頂点 {0}({1})・スリッパの一番下 {2:0.0000} m(足のせ 0.075)・ズボンの一番下 {3:0.0000} m(クッション 0.485)", touch, sbM.ToString().Trim(), slipMin, seatMin)); } // ---- 依頼235:寺島さん(2 つめの CloseupDirector で動かす。部品の名前 Terashima_ → Nurse_) var teraGo = (GameObject)PrefabUtility.InstantiatePrefab(AssetDatabase.LoadAssetAtPath(Closeup231Terashima.Prefab)); teraGo.name = "Terashima235"; foreach (var tr in teraGo.GetComponentsInChildren(true)) if (tr.name.StartsWith("Terashima_")) tr.name = "Nurse_" + tr.name.Substring("Terashima_".Length); var teraN = teraGo.GetComponent(); if (teraN == null) teraN = teraGo.AddComponent(); teraN.Init(); var dir2 = new GameObject("Director235Tera").AddComponent(); dir2.nurse = teraN; dir2.robot = dir.robot; dir2.drawer = dir.drawer; dir2.body = dir.body; dir2.face = dir.face; dir2.ring = dir.ring; dir2.trays = dir.trays; dir2.box = dir.box; dir2.bag = dir.bag; dir2.card = dir.card; dir2.pocket = dir.pocket; dir2.cam = dir.cam; dir2.screenOverlay = dir.screenOverlay; dir2.screenTex = dir.screenTex; dir2.screenTexNames = dir.screenTexNames; dir2.LoadScript(File.ReadAllText(Path.IsPathRooted(scriptName) ? scriptName : Root + "/" + scriptName)); var anT = teraN.Anim; var partsT = new List(); foreach (var smr in teraN.GetComponentsInChildren(true)) foreach (var n in new[] { "Nurse_Skin", "Nurse_Top", "Nurse_Sleeves", "Nurse_Pants", "Nurse_Shoes", "Nurse_Hair" }) if (smr.name == n) partsT.Add(smr); var proxyRootT = new GameObject("Baked235Tera").transform; int nProxyO = proxies.Count; foreach (var smr in teraN.GetComponentsInChildren(true)) { var g = new GameObject(smr.name + "_BakedT"); g.transform.SetParent(proxyRootT, false); var mf = g.AddComponent(); mf.sharedMesh = new Mesh(); var mr = g.AddComponent(); mr.sharedMaterials = smr.sharedMaterials; smr.enabled = false; proxies.Add(new KeyValuePair(smr, mf)); } log.AppendLine("寺島さん:部品 " + partsT.Count + "(体)・写し " + (proxies.Count - nProxyO) + "・骨の Animator " + (anT != null ? anT.isHuman.ToString() : "なし")); MeshFilter talkProxyT = null; for (int i = nProxyO; i < proxies.Count; i++) if (proxies[i].Key.name == "Nurse_Mouth_talk") talkProxyT = proxies[i].Value; if (talkProxyT == null) throw new Exception("寺島さんの口の部品 Nurse_Mouth_talk が無い"); float curMouthScaleT = 1f; Action scaleMouthT = () => { if (!talkProxyT.gameObject.activeSelf || Mathf.Abs(curMouthScaleT - 1f) < 1e-4f) return; var mesh = talkProxyT.sharedMesh; var vs = mesh.vertices; Vector3 fw = teraN.HeadForward().normalized; Vector3 upW = Vector3.ProjectOnPlane(Vector3.up, fw).normalized; Vector3 u = Quaternion.Inverse(talkProxyT.transform.rotation) * upW; float top = float.MinValue; foreach (var v in vs) top = Mathf.Max(top, Vector3.Dot(v, u)); for (int i = 0; i < vs.Length; i++) { float h = Vector3.Dot(vs[i], u) - top; vs[i] -= u * (h * (1f - curMouthScaleT)); } mesh.vertices = vs; mesh.RecalculateBounds(); }; // 看護師の体の当たり(焼いた形の MeshCollider) var nurseColGo = new GameObject("NurseCol230"); nurseColGo.layer = LayerNurse; var nurseCols = new List>(); foreach (var smr in parts) { var g = new GameObject(smr.name + "_Col"); g.layer = LayerNurse; g.transform.SetParent(nurseColGo.transform, false); var mc = g.AddComponent(); mc.sharedMesh = new Mesh(); nurseCols.Add(new KeyValuePair(smr, mc)); } // ---- 画面の絵 var faceR = dir.face.GetComponent(); var faceAlb = new Dictionary(); var faceEmi = new Dictionary(); foreach (var fk in new[] { "closed", "small", "large", "happy" }) { faceAlb[fk] = PrepTex(TexDir + "/face218_" + fk + "_albedo.png", CloseupImport.HakobuDir + "/hakobu_albedo.png"); faceEmi[fk] = PrepTex(TexDir + "/face218_" + fk + "_emission.png", CloseupImport.HakobuDir + "/hakobu_emission.png"); } // 依頼237:目まで笑う顔は 224 と同じ(口の段階ごと)・困り顔(ふだんの大きさ) faceAlb["happy_closed"] = faceAlb["happy"]; faceEmi["happy_closed"] = faceEmi["happy"]; // 224 と同じ:閉じた口は face218_happy foreach (var mk in new[] { "small", "mid", "large" }) { faceAlb["happy_" + mk] = PrepTex(TexDir + "/face224_happy_" + mk + "_albedo.png", ""); faceEmi["happy_" + mk] = PrepTex(TexDir + "/face224_happy_" + mk + "_emission.png", ""); } faceAlb["trouble"] = PrepTex(TexDir + "/face237_trouble_albedo.png", ""); faceEmi["trouble"] = PrepTex(TexDir + "/face237_trouble_emission.png", ""); int fps = js["fps"].I(30), W = js["width"].I(1920), H = js["height"].I(1080), SS = js["supersample"].I(2); int iters = js["nurse"]["ik_iters"].I(3); float dt = 1f / fps; string shotName = shotArg; dir2.BeginShot(shotName + "__tera"); anT.Rebind(); dir.BeginShot(shotName); an.Rebind(); var shot = dir.shot; var C = shot["c237"]; Vector3 O = CloseupDirector.V3(shot["origin"]); var R = ReadRule(js["robot_rule"]); float wcAhead = C["wc_ahead_m"].F(); var scrTex = new Dictionary { { "wait", ScreenTex(TexDir + "/c235_wait_band.png") }, { "deliv", ScreenTex(TexDir + "/c235_deliv_band.png") }, { "pass", ScreenTex(TexDir + "/c235_pass_band.png") }, { "stuck", ScreenTex(TexDir + "/c237_stuck_band.png") } }; // 依頼237:帯だけ var scrKeys = C["screen"]; var ringKeys = C["ring"]; var chairKeys = C["chair"]; var gripBoth = C["grip_both"]; var teraMouth = C["tera_mouth"]; var ringR = dir.ring.GetComponent(); var ringOrig = ringR.sharedMaterial; Color rwc; ColorUtility.TryParseHtmlString(C["ring_wait_color"].S("#F2C230"), out rwc); var ringWait = new Material(Shader.Find("Standard")) { name = "C235_ring_wait" }; ringWait.color = rwc; ringWait.SetFloat("_Glossiness", 0.3f); ringWait.EnableKeyword("_EMISSION"); ringWait.SetColor("_EmissionColor", rwc * 0.9f); ringWait.globalIlluminationFlags = MaterialGlobalIlluminationFlags.None; var robotMouth = C["robot_mouth"]; var nurseMouth = C["nurse_mouth"]; var nmScale = C["nurse_mouth_scale"]; var MC = C["morita"]; float neckShare = MC["neck_share"].F(0.4f), eyeMin = MC["eye_min_scale"].F(0.1f); var mTr = new Dictionary { { "yaw", MC["head_yaw"] }, { "nod", MC["head_nod"] }, { "mouth", MC["mouth"] } }; // 茂さんのまばたき(大城さんと同じ決め方。種は台本の値と場面の名前から) var mBlinks = new List(); { var B = MC["blink"]; int hseed = B["seed"].I(228); foreach (char ch in shotName) hseed = hseed * 31 + ch; var rng = new System.Random(hseed); float a = B["every_min_s"].F(3f), b = B["every_max_s"].F(5f); double tb = a * 0.5 + rng.NextDouble() * (b - a) * 0.5; while (tb < dir.duration + 1) { mBlinks.Add(tb); tb += a + rng.NextDouble() * (b - a); } } float mBlinkS = MC["blink"]["close_s"].F(0.15f); int vFrom = Mathf.RoundToInt(C["video_from"].F() * fps), vTo = Mathf.RoundToInt(C["video_to"].F() * fps); float shT0 = C["man"]["t0"].F(1e9f), shT1 = C["man"]["t1"].F(-1f); var grip = C["grip"]; float gripX = grip["x"].F(), gripY = grip["y"].F(), gripZ = grip["z_behind_root"].F(), gripR = grip["r"].F(); dir.Apply(0f, dt); var rs = MeasureRobot(dir); log.AppendLine(string.Format(IC, "ハコブくんの外形(根から): 幅 x {0:0.000}〜{1:0.000}・奥行 z {2:0.000}〜{3:0.000}・高さ {4:0.000} m", rs.minX, rs.maxX, rs.minZ, rs.maxZ, rs.top)); var bandMaxX = new float[rs.hulls.Count]; for (int b = 0; b < rs.hulls.Count; b++) { bandMaxX[b] = rs.maxX; if (rs.hulls[b] != null) { float mx = float.MinValue; foreach (var qv in rs.hulls[b]) mx = Mathf.Max(mx, qv.x); bandMaxX[b] = mx; } } float xWall = float.MinValue; for (int b = 0; b < rs.hulls.Count; b++) { if (rs.hulls[b] == null) continue; float y0 = b * rs.band, y1 = y0 + rs.band, face = float.MinValue; foreach (var s in solids) { float lx = s.max.x - O.x; if (lx > 0f || s.max.y < y0 || s.min.y > y1) continue; face = Mathf.Max(face, lx); } if (face == float.MinValue) continue; float hmin = float.MaxValue; foreach (var qv in rs.hulls[b]) hmin = Mathf.Min(hmin, qv.x); xWall = Mathf.Max(xWall, face + R.wallClear - hmin); } log.AppendLine(string.Format(IC, "ハコブくんのふだんの横の位置 x={0:0.000}・寄った時 x={1:0.000}(左の箱と {2:0.000} m)", R.laneX, xWall, R.wallClear)); // ---- 状態 float rz = shot["robot_start_z"].F(0f), rx = R.laneX, rv = R.cruise, ra = 0f, ryaw = 0f, vxr = 0f; string mode = "cruise", prevMode = "cruise"; bool latDone = false, seen = false; float seenT = -1f, seenGap = float.NaN, trigT = -1f, trigGap = float.NaN, trigNeed = float.NaN, trigGapLane = float.NaN, trigGapWall = float.NaN, trigTm = float.NaN, trigDm = float.NaN; float latDoneT = -1f, stopT = -1f, decelT = -1f, resumeT = -1f, behindAtResume = float.NaN, nurseBehindAtResume = float.NaN, exitT = -1f, stopFrontGap = float.NaN; var obs = new List(); float stillS = js["robot_rule"]["resume_still_s"].F(0.5f), stillV = js["robot_rule"]["still_mps"].F(0.005f); float lastMoveT = 0f, resumeGapWall = float.NaN, passedT = -1f; bool passedAll = false; Vector3 pvC = Vector3.zero, pvO = Vector3.zero, pvT = Vector3.zero; float pvCy = 0f, pvOy = 0f, pvTy = 0f; int nReact = Mathf.RoundToInt(R.react * fps); // 確かめ float gapMin = float.MaxValue, gapMinT = -1f; string gapMinWhere = ""; float gapPassMin = float.MaxValue, gapPassMinT = -1f; int hitRG = 0, hitCS = 0, hitRS = 0, hitNC = 0, hitHandGrip = 0, hitNS = 0; string hitCSWhere = "", hitRSWhere = "", hitNCWhere = "", hitNSWhere = ""; float chairSolidMin = float.MaxValue, chairRailMin = float.MaxValue, robotRailMin = float.MaxValue, robotRailMinStop = float.MaxValue, nurseSolidMin = float.MaxValue, nurseChairMin = float.MaxValue; float vMin = float.MaxValue, vMax = float.MinValue, aMax = 0f, aMin = 0f, xMinR = float.MaxValue, xMaxR = float.MinValue, yawMaxR = 0f; float stopMove = 0f; Vector3 stopPos = Vector3.zero; float stopYaw = 0f; bool stopped = false; int stopFrames = 0; float palmGripMax = 0f, palmGripMaxT = -1f, palmGripMin = float.MaxValue, palmTargetErrMax = 0f, palmTargetErrT = -1f; float jumpR = 0f, jumpRT = 0f, jumpW = 0f, jumpWT = 0f; string jumpRB = "", jumpWB = ""; // 依頼235 var ncTimes = new List(); float rigidErr = 0f; int hitTS = 0, hitTO = 0, hitTC = 0; string hitTWhere = ""; var passMin = new Dictionary { { "車いす", float.MaxValue }, { "茂さん", float.MaxValue }, { "看護師", float.MaxValue }, { "寺島さん", float.MaxValue } }; var passMinT = new Dictionary { { "車いす", -1f }, { "茂さん", -1f }, { "看護師", -1f }, { "寺島さん", -1f } }; float manYawMax = 0f, manV = 0f, manVT = -1f, manW = 0f, manWT = -1f, manFwd = 0f, manBack = 0f, footRobotMin = float.MaxValue, footRobotMinT = -1f, axZ0 = float.NaN; float oBodyRelMax = 0f, oBodyRelMaxT = -1f, oHeadMaxTalk = 0f, oHeadMaxTalkT = -1f, oLookTeraMin = 180f, relT = -1f, regripT = -1f; bool prevGripR = true; float tHeadMax = 0f, tHeadMaxT = -1f; Vector3 prevAxle = Vector3.zero; float prevCy = 0f; bool havePA = false; float teraZ0 = float.NaN, teraX0 = float.NaN, teraRetDist = 0f, teraRetT0 = -1f, teraRetT1 = -1f; Vector3 prevTera = Vector3.zero; float mJump = 0f, mJumpT = 0f; string mJumpB = ""; float besideT0 = -1f, besideT1 = -1f; // 依頼237 float wheelSlipMax = 0f, casterSlipMax = 0f, tireYMin = float.MaxValue, tireYMax = float.MinValue, cTireYMin = float.MaxValue, cTireYMax = float.MinValue, chairYErr = 0f; float wheelAngL = 0f, wheelAngR = 0f, cwAngL = 0f, cwAngR = 0f, casYawL = 0f, casYawR = 0f, casYawMax = 0f; Vector3 prevHubL = Vector3.zero, prevHubR = Vector3.zero, prevChair = Vector3.zero, prevChairRight = Vector3.right; bool haveChairPrev = false; Vector3 cAxL = Vector3.zero, cAxR = Vector3.zero; // 前の車輪の車軸(世界) // 依頼229:寄せる所の確かめ float shPalmErr = 0f, shPalmGripMin = float.MaxValue, shPalmGripMax = 0f, shWheelSlip = 0f, shCasterSlip = 0f, shCasYaw = 0f, shSlide = 0f, casYawMaxT = -1f; float chairLatV = 0f, chairLatVT = -1f, frontLatV = 0f, frontLatVT = -1f, chairYawMax = 0f, chairYawMaxT = -1f, gapPreShift = float.MaxValue, gapPreShiftT = -1f; float alignT = -1f, alignChairX = float.NaN, alignGap = float.NaN; float prevChairX = float.NaN, prevFrontX = float.NaN; float chairX0 = float.NaN, chairXsh0 = float.NaN, chairXsh1 = float.NaN, chairXpassMin = float.MaxValue, chairXpassMax = float.MinValue; float lookSum = 0f; int lookN = 0; float lookWorst = 0f, lookWorstT = -1f; float mYawMax = 0f, mNodMax = 0f, mLookBest = 180f, mLookBestT = -1f; float mLookAtMaxYaw = float.NaN; string prevScr = ""; var scrChanges = new List(); var prevBones = new Vector3[bonesList.Count]; Vector3 prevRoot = Vector3.zero; bool havePrev = false; var mBoneNames = new[] { "Neck", "Head", "Eye_L", "Eye_R", "LeftHand", "RightHand", "LeftFoot", "RightFoot", "Hips" }; var mBones = new Transform[mBoneNames.Length]; for (int i = 0; i < mBones.Length; i++) mBones[i] = CF(mBoneNames[i]); var mPrevLocal = new Vector3[mBones.Length]; bool mHavePrev = false; SkinnedMeshRenderer shoeSmr = null; foreach (var smr in parts) if (smr.name == "Nurse_Shoes") shoeSmr = smr; var shoeMesh = new Mesh(); Vector3[] shoePrev = null; float[] shoeAcc = null; bool[] shoeOn = null; bool prevInWalk = false; float slideMax = 0f, slideMaxT = 0f, sinkMax = 0f, sinkMaxT = 0f, floatMax = 0f, floatMaxT = 0f; int walkFrames = 0; var nurseWheelMin = float.MaxValue; string nurseWheelWhere = ""; float handGripMin = float.MaxValue; string handGripWhere = ""; int nFrames = Mathf.RoundToInt(Mathf.Min(dir.duration, float.Parse(CloseupArgs.Get("-c237Until", "1e9"), IC)) * fps); string fdirM = Path.Combine(outDir, "frames", shotName), fdirT = Path.Combine(outDir, "frames", shotName + "_top"); bool vMain = frames && views.Contains("main"), vTop = frames && views.Contains("top"); if (vMain) Directory.CreateDirectory(fdirM); if (vTop) { Directory.CreateDirectory(fdirT); Directory.CreateDirectory(fdirT + "_mask"); Directory.CreateDirectory(fdirT + "_obj"); } // 依頼232:_mask は体の型 var csv = new StringBuilder("frame,t,cam,robot_x,robot_z,robot_yaw,robot_v,robot_a,robot_vx,mode,screen,nurse_z,nurse_v,chair_z,front_gap_m,gap_m,gap_lane_pred_m,need_m,behind_nurse_m,rail_gap_m,chair_rail_gap_m,nurse_chair_m,palm_grip_l_m,palm_grip_r_m,head_yaw,head_nod,nurse_mouth,look_deg,m_yaw,m_nod,m_mouth,m_blink,m_look_deg,robot_in_depart,chair_x,chair_yaw,nurse_x,nurse_yaw,m_to_robot_deg,foot_front_m,behind_oshiro_m\n"); var topCsv = new StringBuilder("frame,t,axle_x,axle_z,axle_px,axle_py,robot_x,robot_z,robot_px,robot_py,chair_in,robot_in,nurse_in\n"); // 依頼230 var bonesCsv = new StringBuilder("frame,t"); foreach (var hb in bonesList) bonesCsv.Append("," + hb + "_x," + hb + "_y," + hb + "_z"); bonesCsv.AppendLine(); var feetCsv = new StringBuilder("frame,t,step,lshoe_min_y,rshoe_min_y,shoe_slide\n"); var wcCsv = new StringBuilder("frame,t,chair_x,chair_z,chair_yaw,dist_l,dist_r,wheel_l_deg,wheel_r_deg,caster_l_yaw,caster_r_yaw,caster_wheel_l_deg,caster_wheel_r_deg,tire_min_y,caster_tire_min_y,wheel_slip_m,caster_slip_m\n"); var baked = new Mesh(); var stills = shot["stills"]; var depCam = shot["cameras"]["depart"]; for (int f = 0; f < nFrames; f++) { float t = f * dt; if (f > 0 && f % 150 == 0) GC.Collect(); // 依頼235:長い場面でメモリが増えないように // ---------- ハコブくん:決まり(react_s 前までに見た物) Obs o = null, oLong = null; int oi = obs.Count - 1 - nReact; if (oi >= 0) { o = obs[oi]; if (oi - 15 >= 0) oLong = obs[oi - 15]; } float frontZ = rz + rs.maxZ, rearZ = rz + rs.minZ; float frontGap = float.NaN, gapLane = float.NaN, gapWall = float.NaN, need = float.NaN, behindN = float.NaN; bool ahead = false; if (o != null) { frontGap = o.nearZ - frontZ; behindN = rearZ - o.nurseFarZ; ahead = frontGap < R.detectRange && o.farZ > rearZ; gapLane = o.nearRel - R.laneX; gapWall = o.nearRel - xWall; if (ahead && !seen) { seen = true; seenT = t; seenGap = frontGap; log.AppendLine(string.Format(IC, " {0:0.000} 秒 前から来る物を見つけた(見た時刻 {1:0.000}・前の端とのあいだ {2:0.000} m)", t, o.t, frontGap)); } if (mode == "cruise" && ahead) { float vOther = oLong != null ? Mathf.Max(0f, -(o.nearZ - oLong.nearZ) / (o.t - oLong.t)) : 0f; float tm, dm; PlanStop(rv, ra, rx, ryaw, xWall, R, dt, out tm, out dm); need = dm + vOther * tm + R.margin; if (frontGap < need && gapLane < R.gapSlow) { mode = gapLane < R.gapStop || gapWall < R.gapStop ? "stop" : "yield"; trigT = t; trigGap = frontGap; trigNeed = need; trigGapLane = gapLane; trigGapWall = gapWall; trigTm = tm; trigDm = dm; log.AppendLine(string.Format(IC, " {0:0.000} 秒 決まりに当たった:前の端とのあいだ {1:0.000} m < 止まるまでに縮まる距離 {2:0.000}(自分 {3:0.000} m・{4:0.000} 秒・相手 {5:0.000} m/秒)+余り {6:0.000} = {7:0.000} m/ふだんの位置のすき間 {8:0.000} m・寄った位置のすき間 {9:0.000} m → {10}", t, frontGap, need - R.margin, dm, tm, vOther, R.margin, need, gapLane, gapWall, mode)); } } // 依頼235:止まった後、前の物が resume_still_s 秒動かず、寄った位置で gap_stop_m 以上あけて通れる時に走り出す if (mode == "stop" && stopped && t - lastMoveT >= stillS - 1e-4f && gapWall >= R.gapStop) { mode = "resume"; resumeT = t; nurseBehindAtResume = behindN; behindAtResume = rearZ - o.farZ; resumeGapWall = gapWall; log.AppendLine(string.Format(IC, " {0:0.000} 秒 走り出す:前の物が {1:0.000} 秒動いていない・寄った位置のすき間 {2:0.000} m", t, t - lastMoveT, gapWall)); } if ((mode == "resume" || mode == "cruise2") && !passedAll && rearZ - o.farZ >= 0f) { passedAll = true; passedT = t; log.AppendLine(string.Format(IC, " {0:0.000} 秒 物の一番後ろを通り過ぎた → x {1:0.000} へ戻る", t, R.laneX)); } } if (mode == "stop" && !latDone && Mathf.Abs(xWall - rx) < R.latDone) { latDone = true; latDoneT = t; } if (mode == "resume" && passedAll && rv >= R.cruise - 1e-4f && Mathf.Abs(rx - R.laneX) < 0.002f) mode = "cruise2"; if (mode != prevMode) log.AppendLine(string.Format(IC, " {0:0.000} 秒 決まり {1} → {2}(見た時刻 {3:0.000}・前の端とのあいだ {4:0.000} m・看護師の体が後ろの端から {5:0.000} m)", t, prevMode, mode, o != null ? o.t : -1f, frontGap, behindN)); prevMode = mode; float vT = mode == "cruise" || mode == "cruise2" || mode == "resume" ? R.cruise : mode == "yield" ? R.slow : latDone ? 0f : R.slow; StepSpeed(ref rv, ref ra, vT, R, dt); if (f > 0 && rv < R.cruise - 1e-4f && decelT < 0f) decelT = t - dt; float rx0 = rx; if (mode == "stop" || mode == "yield") StepLat(ref rx, ref ryaw, xWall, rv, R.latAngle, R, dt, xWall); else if ((mode == "resume" || mode == "cruise2") && !passedAll) StepLat(ref rx, ref ryaw, xWall, rv, R.resumeAngle, R, dt, xWall); // 依頼235:通り過ぎるまで寄った位置のまま else if (mode == "resume" || mode == "cruise2") StepLat(ref rx, ref ryaw, R.laneX, rv, R.resumeAngle, R, dt, xWall); vxr = (rx - rx0) / dt; rz += rv * dt; // ---------- 看護師(依頼235:寺島さんを先に。大城さんの Apply がハコブくん・画面を決め直す) dir2.Apply(t, dt); int tml = f < teraMouth.Count ? teraMouth[f].I() : 0; if (tml > 0) teraN.mouth = "talk"; curMouthScaleT = tml > 0 ? nmScale[tml].F() : 1f; teraN.Step(f == 0 ? 0f : dt, iters); dir.Apply(t, dt); dir.robot.position = O + new Vector3(rx, 0f, rz); dir.robot.rotation = Quaternion.Euler(0f, ryaw, 0f); int nml = f < nurseMouth.Count ? nurseMouth[f].I() : 0; if (nml > 0) dir.nurse.mouth = "talk"; curMouthScale = nml > 0 ? nmScale[nml].F() : 1f; dir.nurse.Step(f == 0 ? 0f : dt, iters); // ---------- 車いす:看護師の根の前に固く付ける Transform nr = dir.nurse.transform; { // 依頼235:車いすの根は台本の c235.chair(両手で握っている間は大城さんの根の前に固く付いた値と同じ) var ck = chairKeys[Mathf.Min(f, chairKeys.Count - 1)]; chair.SetPositionAndRotation(O + new Vector3(ck[0].F(), 0f, ck[1].F()), Quaternion.Euler(0f, ck[2].F(), 0f)); bool gb = gripBoth[Mathf.Min(f, gripBoth.Count - 1)].I() == 1; if (gb) { float dRig = Vector3.Distance(chair.position, nr.position + nr.rotation * new Vector3(0f, 0f, wcAhead)) + Mathf.Abs(Mathf.DeltaAngle(chair.eulerAngles.y, nr.eulerAngles.y)) * 0.01f; rigidErr = Mathf.Max(rigidErr, dRig); } } chairYErr = Mathf.Max(chairYErr, Mathf.Abs(chair.position.y)); { // 後ろの車輪:車軸が進んだ長さ(車いすの前の向き)÷ 半径 Vector3 hubL = chair.TransformPoint(hubL0), hubR = chair.TransformPoint(hubR0); float dL = 0f, dR = 0f; if (haveChairPrev) { dL = Vector3.Dot(hubL - prevHubL, chair.forward); dR = Vector3.Dot(hubR - prevHubR, chair.forward); } wheelAngL += dL / 0.28f * Mathf.Rad2Deg; wheelAngR += dR / 0.28f * Mathf.Rad2Deg; wheelL.localRotation = Quaternion.AngleAxis(wheelAngL, axWL) * wlRest; wheelR.localRotation = Quaternion.AngleAxis(wheelAngR, axWR) * wrRest; if (haveChairPrev) { Vector3 rgt = (chair.right + prevChairRight).normalized; // 依頼229:向きが変わるので、コマの前後の向きの間(真ん中)の横で数える float side = Mathf.Max(Mathf.Abs(Vector3.Dot(hubL - prevHubL, rgt)), Mathf.Abs(Vector3.Dot(hubR - prevHubR, rgt))); wheelSlipMax = Mathf.Max(wheelSlipMax, side); if (t >= shT0 - 1e-4f && t <= shT1 + 1e-4f) shWheelSlip = Mathf.Max(shWheelSlip, side); } prevHubL = hubL; prevHubR = hubR; // 前の車輪:支柱に引っぱられて後ろへ付いていく(車軸=支柱から引っぱる向きの後ろ trail の所) Vector3 stL = chair.TransformPoint(stemL0), stR = chair.TransformPoint(stemR0); float trail = new Vector2(cAxL0.x - stemL0.x, cAxL0.z - stemL0.z).magnitude; if (!haveChairPrev) { cAxL = chair.TransformPoint(new Vector3(cAxL0.x, 0f, cAxL0.z)); cAxR = chair.TransformPoint(new Vector3(cAxR0.x, 0f, cAxR0.z)); } float cdL = 0f, cdR = 0f; for (int s = 0; s < 2; s++) { Vector3 st = s == 0 ? stL : stR; Vector3 ax = s == 0 ? cAxL : cAxR; Vector3 d = new Vector3(ax.x - st.x, 0f, ax.z - st.z); Vector3 axN = new Vector3(st.x, 0f, st.z) + (d.sqrMagnitude > 1e-12f ? d.normalized : -chair.forward) * trail; Vector3 move = axN - ax; move.y = 0f; Vector3 rollDir = Vector3.Cross(Vector3.up, (axN - new Vector3(st.x, 0f, st.z)).normalized) * -1f; // 車輪の向き(支柱から車軸の逆=進む向き) Vector3 fwdW = -(axN - new Vector3(st.x, 0f, st.z)).normalized; float roll = Vector3.Dot(move, fwdW); float slip = Vector3.Dot(move, Vector3.Cross(Vector3.up, fwdW)); casterSlipMax = Mathf.Max(casterSlipMax, Mathf.Abs(slip)); float yawW = Mathf.Atan2(fwdW.x, fwdW.z) * Mathf.Rad2Deg; float yawRel = Mathf.DeltaAngle(chair.eulerAngles.y, yawW); if (s == 0) { cAxL = axN; cdL = roll; casYawL = yawRel; } else { cAxR = axN; cdR = roll; casYawR = yawRel; } if (Mathf.Abs(yawRel) > casYawMax) { casYawMax = Mathf.Abs(yawRel); casYawMaxT = t; } if (t >= shT0 - 1e-4f && t <= shT1 + 1e-4f) { shCasYaw = Mathf.Max(shCasYaw, Mathf.Abs(yawRel)); shCasterSlip = Mathf.Max(shCasterSlip, Mathf.Abs(slip)); } if (rollDir.sqrMagnitude < 0f) roll = 0f; } casL.localRotation = Quaternion.AngleAxis(casYawL, axCL) * clRest; casR.localRotation = Quaternion.AngleAxis(casYawR, axCR) * crRest; cwAngL += cdL / 0.075f * Mathf.Rad2Deg; cwAngR += cdR / 0.075f * Mathf.Rad2Deg; cwL.localRotation = Quaternion.AngleAxis(cwAngL, axCWL) * cwlRest; cwR.localRotation = Quaternion.AngleAxis(cwAngR, axCWR) * cwrRest; float tmn = float.MaxValue, ctmn = float.MaxValue; foreach (var v in wheelL.GetComponent().sharedMesh.vertices) tmn = Mathf.Min(tmn, wheelL.TransformPoint(v).y); foreach (var v in wheelR.GetComponent().sharedMesh.vertices) tmn = Mathf.Min(tmn, wheelR.TransformPoint(v).y); foreach (var v in cwL.GetComponent().sharedMesh.vertices) ctmn = Mathf.Min(ctmn, cwL.TransformPoint(v).y); foreach (var v in cwR.GetComponent().sharedMesh.vertices) ctmn = Mathf.Min(ctmn, cwR.TransformPoint(v).y); tireYMin = Mathf.Min(tireYMin, tmn); tireYMax = Mathf.Max(tireYMax, tmn); cTireYMin = Mathf.Min(cTireYMin, ctmn); cTireYMax = Mathf.Max(cTireYMax, ctmn); wcCsv.AppendLine(f + "," + F(t, "0.000") + "," + F(chair.position.x - O.x) + "," + F(chair.position.z - O.z) + "," + F(chair.eulerAngles.y, "0.000") + "," + F(dL, "0.00000") + "," + F(dR, "0.00000") + "," + F(wheelAngL, "0.000") + "," + F(wheelAngR, "0.000") + "," + F(casYawL, "0.000") + "," + F(casYawR, "0.000") + "," + F(cwAngL, "0.000") + "," + F(cwAngR, "0.000") + "," + F(tmn, "0.00000") + "," + F(ctmn, "0.00000") + "," + F(wheelSlipMax, "0.00000") + "," + F(casterSlipMax, "0.00000")); prevChair = chair.position; prevChairRight = chair.right; haveChairPrev = true; } // ---------- 依頼235:前の物が動いたか(車いす・大城さん・寺島さんの根と向き) { Vector3 pc = chair.position, po = nr.position, pt = teraN.transform.position; float yc = chair.eulerAngles.y, yo = nr.eulerAngles.y, yt = teraN.transform.eulerAngles.y; if (f > 0) { float mvm = Mathf.Max(Vector3.Distance(pc, pvC), Mathf.Max(Vector3.Distance(po, pvO), Vector3.Distance(pt, pvT))) / dt; float mva = Mathf.Max(Mathf.Abs(Mathf.DeltaAngle(yc, pvCy)), Mathf.Max(Mathf.Abs(Mathf.DeltaAngle(yo, pvOy)), Mathf.Abs(Mathf.DeltaAngle(yt, pvTy)))) / dt; if (mvm > stillV || mva > 0.5f) lastMoveT = t; } pvC = pc; pvO = po; pvT = pt; pvCy = yc; pvOy = yo; pvTy = yt; } // ---------- 依頼229:車いすの横の位置・向き・横の速さ(根と足のせの前の端) { float cx = chair.position.x - O.x, fx = chair.TransformPoint(new Vector3(0f, 0f, 0.64f)).x - O.x, cyaw = Mathf.DeltaAngle(180f, chair.eulerAngles.y); if (f == 0) chairX0 = cx; if (Mathf.Abs(t - shT0) < 0.5f * dt) chairXsh0 = cx; if (Mathf.Abs(t - shT1) < 0.5f * dt) chairXsh1 = cx; if (!float.IsNaN(prevChairX)) { float v1 = Mathf.Abs(cx - prevChairX) / dt, v2 = Mathf.Abs(fx - prevFrontX) / dt; if (v1 > chairLatV) { chairLatV = v1; chairLatVT = t; } if (v2 > frontLatV) { frontLatV = v2; frontLatVT = t; } } if (Mathf.Abs(cyaw) > chairYawMax) { chairYawMax = Mathf.Abs(cyaw); chairYawMaxT = t; } prevChairX = cx; prevFrontX = fx; } // ---------- 茂さん:顔の向き・うなずき・口・まばたき float mYaw = CloseupDirector.Num(mTr, "yaw", t, 0f), mNod = CloseupDirector.Num(mTr, "nod", t, 0f); string mMouth = CloseupDirector.Str(mTr, "mouth", t, "flat"); { var ml = C["morita_mouth_lvl"]; if (f < ml.Count && ml[f].I() > 0) mMouth = "talk"; } // 依頼235:茂さんが話す間は talk mYawMax = Mathf.Max(mYawMax, Mathf.Abs(mYaw)); mNodMax = Mathf.Max(mNodMax, mNod); Quaternion qNeck = Quaternion.AngleAxis(neckShare * mYaw, Vector3.up) * Quaternion.AngleAxis(neckShare * mNod, Vector3.right); Quaternion qHead = Quaternion.AngleAxis(mYaw, Vector3.up) * Quaternion.AngleAxis(mNod, Vector3.right); mNeck.rotation = chair.rotation * qNeck * neckRest; mHead.rotation = chair.rotation * qHead * headRest; foreach (var kv in mMouths) kv.Value.SetActive(kv.Key == mMouth); float mbl = 0f; for (int i = 0; i < mBlinks.Count; i++) { double u = (t - mBlinks[i]) / mBlinkS; if (u >= 0 && u <= 1) mbl = (float)(1.0 - Math.Abs(u * 2 - 1)); } float es = Mathf.Lerp(1f, eyeMin, mbl); mEyeL.localScale = new Vector3(eyeSL.x, eyeSL.y, eyeSL.z * es); mEyeR.localScale = new Vector3(eyeSR.x, eyeSR.y, eyeSR.z * es); // ---------- 画面 string rmo = f < robotMouth.Count ? robotMouth[f].S() : "mid"; // 依頼237:画面は台本の時刻のとおり(235 の走り出しの目まで笑う顔はやめた) string sk = "face"; for (int k = 0; k < scrKeys.Count; k++) if (scrKeys[k][0].F() <= t + 1e-4f) sk = scrKeys[k][1].S(); bool bandNow = scrTex.ContainsKey(sk); bool happyNow = sk == "happy"; dir.screenOverlay.gameObject.SetActive(bandNow); if (bandNow) { var mpo = new MaterialPropertyBlock(); mpo.SetTexture("_MainTex", scrTex[sk]); dir.screenOverlay.SetPropertyBlock(mpo); } string rk = "normal"; for (int k = 0; k < ringKeys.Count; k++) { string v = ringKeys[k][1].S(); if (v == "normal" && k > 0) continue; if (ringKeys[k][0].F() <= t + 1e-4f) rk = v; } if (resumeT >= 0f) rk = "normal"; ringR.sharedMaterial = rk == "wait" ? ringWait : ringOrig; string fk = happyNow ? "happy_" + rmo : sk == "stuck" ? "trouble" : rmo != "mid" ? rmo : ""; // 依頼237:224 の目まで笑う顔・通れませんは困り顔 { var mpf = new MaterialPropertyBlock(); if (fk != "") { mpf.SetTexture("_MainTex", faceAlb[fk]); mpf.SetTexture("_EmissionMap", faceEmi[fk]); } faceR.SetPropertyBlock(mpf); } string scrNow = (bandNow ? "絵" + sk : "") + (happyNow ? "目まで笑う顔" : sk == "stuck" ? "困り顔" : "基本") + (rk == "wait" ? "+輪の待つ色" : "") + "_" + rmo; if (scrNow.Split('_')[0] != prevScr.Split('_')[0]) scrChanges.Add(F(t, "0.000") + "\t" + (prevScr == "" ? "-" : prevScr.Split('_')[0]) + " → " + scrNow.Split('_')[0]); prevScr = scrNow; Physics.SyncTransforms(); // ---------- 看護師の体を焼く(見る・確かめる) var ob = new Obs { t = t, nearZ = float.MaxValue, farZ = float.MinValue, nurseFarZ = float.MinValue, nearRel = float.MaxValue }; float gap = float.MaxValue; string gapWhere = ""; var passNow = new Dictionary { { "車いす", float.MaxValue }, { "茂さん", float.MaxValue }, { "看護師", float.MaxValue }, { "寺島さん", float.MaxValue } }; Matrix4x4 toR = dir.robot.worldToLocalMatrix; Matrix4x4 toC = chair.worldToLocalMatrix; float nurseChairNow = float.MaxValue; Action seeVert = (w, who) => { Vector3 lc = w - O; if (w.y <= rs.top + 0.1f) ob.nearRel = Mathf.Min(ob.nearRel, lc.x - bandMaxX[Mathf.Clamp(Mathf.FloorToInt(w.y / rs.band), 0, bandMaxX.Length - 1)]); ob.nearZ = Mathf.Min(ob.nearZ, lc.z); ob.farZ = Mathf.Max(ob.farZ, lc.z); Vector3 lr = toR.MultiplyPoint3x4(w); if (lr.x < rs.minX - 1.6f || lr.x > rs.maxX + 1.6f || lr.z < rs.minZ - 1.6f || lr.z > rs.maxZ + 1.6f) return; // 依頼235:1.5 m より遠い点は数えない(速くするため。1.5 m より近い値は同じ) string cat0 = who.Substring(0, Math.Max(0, who.IndexOf(' '))); float cutW = passNow.ContainsKey(cat0) ? Mathf.Min(passNow[cat0], 1.5f) : Mathf.Min(gap, 1.5f); float d = RobotDist(rs, lr, Mathf.Max(cutW, Mathf.Min(gap, 1.5f))); if (passNow.ContainsKey(cat0) && d < passNow[cat0]) passNow[cat0] = d; if (d < gap) { gap = d; gapWhere = who; } }; int pi = -1; bool ncHit = false, hgHit = false, nsHit = false; for (int ci = 0; ci < nurseCols.Count; ci++) { var smr = nurseCols[ci].Key; var cm = nurseCols[ci].Value.sharedMesh; smr.BakeMesh(cm, true); nurseCols[ci].Value.sharedMesh = null; nurseCols[ci].Value.sharedMesh = cm; nurseCols[ci].Value.transform.SetPositionAndRotation(smr.transform.position, smr.transform.rotation); } Physics.SyncTransforms(); foreach (var smr in parts) { pi++; smr.BakeMesh(baked, true); Matrix4x4 m = Matrix4x4.TRS(smr.transform.position, smr.transform.rotation, Vector3.one); var vs = baked.vertices; var cat = partCat[pi]; for (int i = 0; i < vs.Length; i++) { Vector3 w = m.MultiplyPoint3x4(vs[i]); ob.nurseFarZ = Mathf.Max(ob.nurseFarZ, w.z - O.z); seeVert(w, "看護師 " + smr.name); foreach (var s in solids) { if (w.x < s.min.x - 0.3f || w.x > s.max.x + 0.3f || w.z < s.min.z - 0.3f || w.z > s.max.z + 0.3f) continue; if (InBox(w, s.min, s.max)) { nsHit = true; if (hitNSWhere == "") hitNSWhere = F(t, "0.000") + " 秒 " + smr.name + "→" + s.name; } nurseSolidMin = Mathf.Min(nurseSolidMin, PointBoxDist(w, s.min, s.max)); } // 看護師と車いす:車いすの近くの頂点だけ Vector3 lcw = toC.MultiplyPoint3x4(w); if (lcw.x < chairMin.x - 0.05f || lcw.x > chairMax.x + 0.05f || lcw.z < chairMin.z - 0.05f || lcw.z > chairMax.z + 0.05f || lcw.y > chairMax.y + 0.05f) continue; bool hand = cat[i] != ""; if (hand) { // 手:握りの筒(中心の線から gripR)に入らない。握りのほかの車いすの面にも入らない float ax = Mathf.Abs(lcw.x) - gripX, ay = lcw.y - gripY; if (Mathf.Abs(lcw.z + gripZ) < 0.045f) { float dg = Mathf.Sqrt(ax * ax + ay * ay) - gripR; if (dg < handGripMin) { handGripMin = dg; handGripWhere = F(t, "0.000") + " 秒 " + cat[i] + " " + lcw.ToString("0.000"); } } if (Mathf.Abs(lcw.z + gripZ) < 0.045f && Mathf.Sqrt(ax * ax + ay * ay) < gripR - 0.001f) { hgHit = true; if (hitNCWhere == "") hitNCWhere = F(t, "0.000") + " 秒 " + cat[i] + "→握りの中"; } foreach (var col in Physics.OverlapSphere(w, 0.001f, 1 << LayerChair)) if (chairCol[col] != "WC_Parts") { ncHit = true; if (hitNCWhere == "") hitNCWhere = F(t, "0.000") + " 秒 " + cat[i] + "→" + chairCol[col]; } } else { var cols = Physics.OverlapSphere(w, 0.003f, 1 << LayerChair); if (cols.Length > 0) { ncHit = true; if (hitNCWhere == "") hitNCWhere = F(t, "0.000") + " 秒 " + smr.name + "→" + chairCol[cols[0]] + " 車いすから " + lcw.ToString("0.000"); } // 一番近い車いすの頂点(参考) if (lcw.y < 0.6f) for (int k = 0; k < chairVertsLocal.Count; k += 3) { float dd = (chairVertsLocal[k] - lcw).sqrMagnitude; if (dd < nurseChairNow * nurseChairNow) { nurseChairNow = Mathf.Sqrt(dd); if (nurseChairNow < nurseWheelMin) { nurseWheelMin = nurseChairNow; nurseWheelWhere = F(t, "0.000") + " 秒 " + smr.name + "と" + chairVertsPart[k]; } } } } } } // 依頼235:寺島さんの頂点(見る・壁/手すり・大城さん・車いす) { bool tsHit = false, toHit = false, tcHit = false; foreach (var smr in partsT) { smr.BakeMesh(baked, true); Matrix4x4 m = Matrix4x4.TRS(smr.transform.position, smr.transform.rotation, Vector3.one); var vs = baked.vertices; for (int i = 0; i < vs.Length; i += 2) { Vector3 w = m.MultiplyPoint3x4(vs[i]); seeVert(w, "寺島さん " + smr.name); foreach (var s2 in solids) { if (w.x < s2.min.x - 0.1f || w.x > s2.max.x + 0.1f || w.z < s2.min.z - 0.1f || w.z > s2.max.z + 0.1f) continue; if (InBox(w, s2.min, s2.max)) { tsHit = true; if (hitTWhere == "") hitTWhere = F(t, "0.000") + " 秒 寺島さん " + smr.name + "→" + s2.name; } } if (Physics.CheckSphere(w, 0.003f, 1 << LayerNurse)) { toHit = true; if (hitTWhere == "") hitTWhere = F(t, "0.000") + " 秒 寺島さん " + smr.name + "→大城さん"; } if (Physics.CheckSphere(w, 0.003f, 1 << LayerChair)) { tcHit = true; if (hitTWhere == "") hitTWhere = F(t, "0.000") + " 秒 寺島さん " + smr.name + "→車いす"; } } } if (tsHit) hitTS++; if (toHit) hitTO++; if (tcHit) hitTC++; } // 車いすの頂点が看護師の体に入らない(足・すねと転倒防止のバー・後ろの車輪) { Matrix4x4 cw = chair.localToWorldMatrix; for (int k = 0; k < chairVertsLocal.Count; k++) { Vector3 lp = chairVertsLocal[k]; if (lp.z > -0.1f) continue; // 看護師に近い後ろの半分だけ Vector3 w = cw.MultiplyPoint3x4(lp); if (chairVertsPart[k] == "WC_Parts" && lp.y > 0.85f) continue; // 握り(手でにぎる) if (Physics.CheckSphere(w, 0.002f, 1 << LayerNurse)) { ncHit = true; if (hitNCWhere == "") hitNCWhere = F(t, "0.000") + " 秒 車いす " + chairVertsPart[k] + " が看護師の体に"; } } } nurseChairMin = Mathf.Min(nurseChairMin, nurseChairNow); // 車いすの頂点(見る・壁・ハコブくん) bool csHit = false; float chairRailNow = float.MaxValue; { Matrix4x4 cw = chair.localToWorldMatrix; for (int k = 0; k < chairVertsLocal.Count; k++) { Vector3 w = cw.MultiplyPoint3x4(chairVertsLocal[k]); seeVert(w, "車いす " + chairVertsPart[k]); foreach (var s in solids) { if (w.x < s.min.x - 0.3f || w.x > s.max.x + 0.3f || w.z < s.min.z - 0.3f || w.z > s.max.z + 0.3f) continue; if (InBox(w, s.min, s.max)) { csHit = true; if (hitCSWhere == "") hitCSWhere = F(t, "0.000") + " 秒 " + chairVertsPart[k] + "→" + s.name; } float dd = PointBoxDist(w, s.min, s.max); chairSolidMin = Mathf.Min(chairSolidMin, dd); if (s.rail) chairRailNow = Mathf.Min(chairRailNow, dd); } } } chairRailMin = Mathf.Min(chairRailMin, chairRailNow); // 茂さんの頂点(見る・壁・ハコブくん) foreach (var smr in morParts) { if (!smr.gameObject.activeInHierarchy) continue; smr.BakeMesh(bakedM, true); Matrix4x4 m = Matrix4x4.TRS(smr.transform.position, smr.transform.rotation, Vector3.one); var vs = bakedM.vertices; for (int i = 0; i < vs.Length; i += 2) { Vector3 w = m.MultiplyPoint3x4(vs[i]); seeVert(w, "茂さん " + smr.name); foreach (var s in solids) { if (w.x < s.min.x - 0.1f || w.x > s.max.x + 0.1f || w.z < s.min.z - 0.1f || w.z > s.max.z + 0.1f) continue; if (InBox(w, s.min, s.max)) { csHit = true; if (hitCSWhere == "") hitCSWhere = F(t, "0.000") + " 秒 茂さん " + smr.name + "→" + s.name; } chairSolidMin = Mathf.Min(chairSolidMin, PointBoxDist(w, s.min, s.max)); } } } obs.Add(ob); if (gap <= 0f) hitRG++; if (ncHit && ncTimes.Count < 80) ncTimes.Add(F(t, "0.000")); if (csHit) hitCS++; if (ncHit) hitNC++; if (hgHit) hitHandGrip++; if (nsHit) hitNS++; if (gap < gapMin) { gapMin = gap; gapMinT = t; gapMinWhere = gapWhere; } bool overlapZ = ob.nearZ <= rz + rs.maxZ && ob.farZ >= rz + rs.minZ; if (overlapZ && gap < gapPassMin) { gapPassMin = gap; gapPassMinT = t; } if (resumeT >= 0f) foreach (var kc in new List(passNow.Keys)) if (passNow[kc] < passMin[kc]) { passMin[kc] = passNow[kc]; passMinT[kc] = t; } if (t < shT0 - 1e-4f && gap < gapPreShift) { gapPreShift = gap; gapPreShiftT = t; } if (alignT < 0f && ob.nearZ <= rz + rs.maxZ) { alignT = t; alignChairX = chair.position.x - O.x; alignGap = gap; log.AppendLine(string.Format(IC, " {0:0.000} 秒 車いすの前の端がハコブくんの前の端と並んだ(車いすの根 x {1:0.0000}・すき間 {2:0.000} m)", t, alignChairX, gap)); } if (overlapZ) { float cxp = chair.position.x - O.x; chairXpassMin = Mathf.Min(chairXpassMin, cxp); chairXpassMax = Mathf.Max(chairXpassMax, cxp); } // ハコブくんと箱(壁・手すり・扉) bool rsHit = false; float railGapNow = float.MaxValue; Matrix4x4 toW = dir.robot.localToWorldMatrix; foreach (var v in rs.verts) { Vector3 w = toW.MultiplyPoint3x4(v); foreach (var s in solids) { if (w.x < s.min.x - 0.3f || w.x > s.max.x + 0.3f || w.z < s.min.z - 0.3f || w.z > s.max.z + 0.3f) continue; if (InBox(w, s.min, s.max)) { rsHit = true; if (hitRSWhere == "") hitRSWhere = F(t, "0.000") + " 秒 →" + s.name; } if (s.rail) railGapNow = Mathf.Min(railGapNow, PointBoxDist(w, s.min, s.max)); } } if (rsHit) hitRS++; robotRailMin = Mathf.Min(robotRailMin, railGapNow); if (f > 0) { vMin = Mathf.Min(vMin, rv); vMax = Mathf.Max(vMax, rv); aMax = Mathf.Max(aMax, ra); aMin = Mathf.Min(aMin, ra); } xMinR = Mathf.Min(xMinR, rx); xMaxR = Mathf.Max(xMaxR, rx); yawMaxR = Mathf.Max(yawMaxR, Mathf.Abs(ryaw)); if (rv == 0f && mode == "stop") { if (!stopped) { stopped = true; stopT = t; stopPos = dir.robot.position; stopYaw = ryaw; stopFrontGap = ob.nearZ - (rz + rs.maxZ); log.AppendLine(string.Format(IC, " {0:0.000} 秒 止まった(x {1:0.0000}・z {2:0.0000}・向き {3:0.000}°・足のせの前の端とのあいだ {4:0.000} m)", t, rx, rz, ryaw, stopFrontGap)); } stopMove = Mathf.Max(stopMove, Vector3.Distance(dir.robot.position, stopPos) + Mathf.Abs(Mathf.DeltaAngle(ryaw, stopYaw)) * 0.01f); robotRailMinStop = Mathf.Min(robotRailMinStop, railGapNow); stopFrames++; } // 手と握り float pgL = float.NaN, pgR = float.NaN; bool gbNow = gripBoth[Mathf.Min(f, gripBoth.Count - 1)].I() == 1; { // 依頼235:右手を握りからはなした時刻・握り直した時刻(右手の重み) float wR = dir.nurse.hands[1].weight; if (prevGripR && wR < 0.999f && relT < 0f) relT = t; if (!prevGripR && wR >= 0.999f && regripT < 0f) regripT = t; prevGripR = wR >= 0.999f; } for (int s = 0; s < 2; s++) { if (s == 1 && !gbNow) continue; // 依頼235:右手をはなしている間は数えない Vector3 pc = toC.MultiplyPoint3x4(dir.nurse.PalmCenter(s)); float ax = pc.x - (s == 0 ? -gripX : gripX), ay = pc.y - gripY, az = Mathf.Max(0f, Mathf.Abs(pc.z + gripZ) - 0.035f); float d = Mathf.Sqrt(ax * ax + ay * ay + az * az) - gripR; if (s == 0) pgL = d; else pgR = d; if (d > palmGripMax) { palmGripMax = d; palmGripMaxT = t; } palmGripMin = Mathf.Min(palmGripMin, d); var h = dir.nurse.hands[s]; float te = Vector3.Distance(dir.nurse.PalmCenter(s), h.palmTarget); if (te > palmTargetErrMax) { palmTargetErrMax = te; palmTargetErrT = t; } if (t >= shT0 - 1e-4f && t <= shT1 + 1e-4f) { shPalmErr = Mathf.Max(shPalmErr, te); shPalmGripMin = Mathf.Min(shPalmGripMin, d); shPalmGripMax = Mathf.Max(shPalmGripMax, d); } } // 依頼235:寄せる道・体と顔の向き・寺島さん float frNow = float.NaN; { Vector3 axle = chair.TransformPoint((hubL0 + hubR0) * 0.5f); axle.y = 0f; float cy = Mathf.DeltaAngle(180f, chair.eulerAngles.y); if (float.IsNaN(axZ0) && t >= shT0 - 1e-4f) axZ0 = axle.z; if (t >= shT0 - 1e-4f && t <= shT1 + 0.5f) { manYawMax = Mathf.Max(manYawMax, Mathf.Abs(cy)); if (havePA) { float v1 = Vector3.Distance(axle, prevAxle) / dt, w1 = Mathf.Abs(Mathf.DeltaAngle(cy, prevCy)) / dt; if (v1 > manV) { manV = v1; manVT = t; } if (w1 > manW) { manW = w1; manWT = t; } } manFwd = Mathf.Max(manFwd, axZ0 - axle.z); manBack = Mathf.Max(manBack, axle.z - axZ0); } prevAxle = axle; prevCy = cy; havePA = true; // 足のせの前の端(車いすの頂点で一番 −z)とハコブくんの前の端 float fz = float.MaxValue; Matrix4x4 cw2 = chair.localToWorldMatrix; foreach (var v in chairVertsLocal) if (v.z > 0.5f) fz = Mathf.Min(fz, cw2.MultiplyPoint3x4(v).z); float fr = fz - (rz + rs.maxZ + O.z); frNow = fr; if (stopped && resumeT < 0f && fr < footRobotMin) { footRobotMin = fr; footRobotMinT = t; } // 依頼237:ハコブくんが車いすの横にいる間(走り出した後、前の端が足のせの前の端を過ぎてから、後ろの端が大城さんの後ろの端を過ぎるまで) if (resumeT >= 0f && besideT0 < 0f && fr <= 0f) { besideT0 = t; log.AppendLine(string.Format(IC, " {0:0.000} 秒 ハコブくんの前の端が足のせの前の端を過ぎた(横にいる間の始まり)", t)); } if (besideT0 >= 0f && besideT1 < 0f && (rz + rs.minZ) - ob.nurseFarZ >= 0f) { besideT1 = t; log.AppendLine(string.Format(IC, " {0:0.000} 秒 ハコブくんの後ろの端が大城さんの後ろの端を過ぎた(横にいる間の終わり)", t)); } // 大城さんの体の向き(車いすから)・顔(体から) float bodyRel = Mathf.Abs(Mathf.DeltaAngle(nr.eulerAngles.y, chair.eulerAngles.y)); if (bodyRel > oBodyRelMax) { oBodyRelMax = bodyRel; oBodyRelMaxT = t; } if (!gbNow && Mathf.Abs(dir.nurse.headYawDeg) > oHeadMaxTalk) { oHeadMaxTalk = Mathf.Abs(dir.nurse.headYawDeg); oHeadMaxTalkT = t; } if (!gbNow) { var tEL = CloseupNurse.Find(teraN.transform, "Eye_L"); var tER = CloseupNurse.Find(teraN.transform, "Eye_R"); var oEL = CloseupNurse.Find(dir.nurse.transform, "Eye_L"); var oER = CloseupNurse.Find(dir.nurse.transform, "Eye_R"); float la = Vector3.Angle(dir.nurse.HeadForward(), 0.5f * (tEL.position + tER.position) - 0.5f * (oEL.position + oER.position)); oLookTeraMin = Mathf.Min(oLookTeraMin, la); } if (Mathf.Abs(teraN.headYawDeg) > tHeadMax) { tHeadMax = Mathf.Abs(teraN.headYawDeg); tHeadMaxT = t; } Vector3 tp = teraN.transform.position; var tr0 = C["tera_ret"]["t"]; if (t >= tr0[0].F() - 1e-4f && t <= tr0[1].F() + 1e-4f) { if (float.IsNaN(teraX0)) { teraX0 = tp.x; teraZ0 = tp.z; teraRetT0 = t; } teraRetDist = Mathf.Max(teraRetDist, new Vector2(tp.x - teraX0, tp.z - teraZ0).magnitude); teraRetT1 = t; } prevTera = tp; } // 目線:大城さんの顔の向きとハコブくんの画面 Vector3 scr = dir.ScreenWorld(0f, 0f, 0f); var eyeL = CloseupNurse.Find(dir.nurse.transform, "Eye_L"); var eyeR = CloseupNurse.Find(dir.nurse.transform, "Eye_R"); Vector3 headPos = 0.5f * (eyeL.position + eyeR.position); float lookNow = Vector3.Angle(dir.nurse.HeadForward(), scr - headPos); var lw = shot["look_windows"]; for (int k = 0; k < lw.Count; k++) if (t >= lw[k][0].F() - 1e-4f && t <= lw[k][1].F() + 1e-4f) { lookSum += lookNow; lookN++; if (lookNow > lookWorst) { lookWorst = lookNow; lookWorstT = t; } } // 茂さんの顔の向き(Head の骨の前)とハコブくんの画面 Vector3 mEye = 0.5f * (mEyeL.position + mEyeR.position); Vector3 mFwd = chair.rotation * (qHead * Vector3.forward); float mLook = Vector3.Angle(mFwd, scr - mEye); Vector3 mToR = Quaternion.Inverse(chair.rotation) * (scr - mEye); float mToRobot = Mathf.Atan2(mToR.x, mToR.z) * Mathf.Rad2Deg; // 依頼237:茂さんの目からハコブくんの画面へ(車いすから見た向き・+ はハコブくんの側) if (Mathf.Abs(mYaw) > 0.9f * mYawMax && mYawMax > 1f && mLook < mLookBest) { mLookBest = mLook; mLookBestT = t; } // 骨:1 コマの動き(根の動きを除いた) Vector3 rootNow = dir.nurse.transform.position; bonesCsv.Append(f + "," + F(t, "0.000")); for (int b = 0; b < bonesList.Count; b++) { Vector3 p = an.GetBoneTransform(bonesList[b]).position; bonesCsv.Append("," + F(p.x, "0.00000") + "," + F(p.y, "0.00000") + "," + F(p.z, "0.00000")); if (havePrev) { float dw = Vector3.Distance(p, prevBones[b]); float drl = ((p - prevBones[b]) - (rootNow - prevRoot)).magnitude; if (dw > jumpW) { jumpW = dw; jumpWT = t; jumpWB = bonesList[b].ToString(); } if (drl > jumpR) { jumpR = drl; jumpRT = t; jumpRB = bonesList[b].ToString(); } } prevBones[b] = p; } bonesCsv.AppendLine(); prevRoot = rootNow; havePrev = true; for (int b = 0; b < mBones.Length; b++) { Vector3 lp = chair.InverseTransformPoint(mBones[b].position); if (mHavePrev) { float d = Vector3.Distance(lp, mPrevLocal[b]); if (d > mJump) { mJump = d; mJumpT = t; mJumpB = mBoneNames[b]; } } mPrevLocal[b] = lp; } mHavePrev = true; // 足(217 と同じ) { bool inWalk = dir.InStep(t); float lMin = float.MaxValue, rMin = float.MaxValue; shoeSmr.BakeMesh(shoeMesh, true); Matrix4x4 sm = Matrix4x4.TRS(shoeSmr.transform.position, shoeSmr.transform.rotation, Vector3.one); Vector3 lfp = an.GetBoneTransform(HumanBodyBones.LeftFoot).position, rfp = an.GetBoneTransform(HumanBodyBones.RightFoot).position; var sv = shoeMesh.vertices; if (shoePrev == null || shoePrev.Length != sv.Length) { shoePrev = new Vector3[sv.Length]; shoeAcc = new float[sv.Length]; shoeOn = new bool[sv.Length]; } bool winChange = inWalk != prevInWalk; prevInWalk = inWalk; float slideNow = 0f; for (int i = 0; i < sv.Length; i++) { Vector3 w = sm.MultiplyPoint3x4(sv[i]); if ((w - lfp).sqrMagnitude < (w - rfp).sqrMagnitude) lMin = Mathf.Min(lMin, w.y); else rMin = Mathf.Min(rMin, w.y); bool on = w.y <= 0.01f; if (on && (!shoeOn[i] || winChange)) shoePrev[i] = w; shoeAcc[i] = on ? new Vector2(w.x - shoePrev[i].x, w.z - shoePrev[i].z).magnitude : 0f; shoeOn[i] = on; slideNow = Mathf.Max(slideNow, shoeAcc[i]); } if (inWalk && t >= shT0 - 1e-4f && t <= shT1 + 1e-4f) shSlide = Mathf.Max(shSlide, slideNow); if (inWalk) { walkFrames++; if (slideNow > slideMax) { slideMax = slideNow; slideMaxT = t; } float low = Mathf.Min(lMin, rMin); if (-low > sinkMax) { sinkMax = -low; sinkMaxT = t; } if (low > floatMax) { floatMax = low; floatMaxT = t; } } feetCsv.AppendLine(f + "," + F(t, "0.000") + "," + (inWalk ? 1 : 0) + "," + F(lMin) + "," + F(rMin) + "," + F(slideNow)); } // 走り出した後:ハコブくんが depart のカメラの画面の外へ出たか int robotIn = -1; if (resumeT >= 0f && depCam != null && !depCam.IsNull) { SetCam(dir.cam, depCam, O, dir); robotIn = 0; foreach (var r in dir.robot.GetComponentsInChildren()) { if (!r.gameObject.activeInHierarchy) continue; var bb = r.bounds; for (int c8 = 0; c8 < 8 && robotIn == 0; c8++) { Vector3 p = new Vector3((c8 & 1) == 0 ? bb.min.x : bb.max.x, (c8 & 2) == 0 ? bb.min.y : bb.max.y, (c8 & 4) == 0 ? bb.min.z : bb.max.z); Vector3 vp = dir.cam.WorldToViewportPoint(p); if (vp.z > 0f && vp.x > 0f && vp.x < 1f && vp.y > 0f && vp.y < 1f) robotIn = 1; } } if (robotIn == 0 && exitT < 0f && t > resumeT + 0.5f) { exitT = t; log.AppendLine(string.Format(IC, " {0:0.000} 秒 ハコブくんが depart のカメラの画面の外へ出た", t)); } } string camName = CutAt(shot, t); float nrv = 0f; { var kz = shot["nurse"]["z"]; nrv = -(CloseupDirector.Num(new Dictionary { { "z", kz } }, "z", t + dt * 0.5f, 0f) - CloseupDirector.Num(new Dictionary { { "z", kz } }, "z", t - dt * 0.5f, 0f)) / dt; } csv.AppendLine(f + "," + F(t, "0.000") + "," + camName + "," + F(rx) + "," + F(rz) + "," + F(ryaw, "0.000") + "," + F(rv) + "," + F(ra) + "," + F(vxr) + "," + mode + "," + scrNow + "," + F(nr.position.z - O.z) + "," + F(nrv) + "," + F(chair.position.z - O.z) + "," + F(ob.nearZ - (rz + rs.maxZ)) + "," + F(gap) + "," + (float.IsNaN(gapLane) ? "" : F(gapLane)) + "," + (float.IsNaN(need) ? "" : F(need)) + "," + F(rearZ - ob.nurseFarZ) + "," + F(railGapNow) + "," + F(chairRailNow) + "," + (nurseChairNow < float.MaxValue ? F(nurseChairNow) : "") + "," + F(pgL) + "," + F(pgR) + "," + F(dir.nurse.headYawDeg, "0.000") + "," + F(dir.nurse.headNodDeg, "0.000") + "," + nml + "," + F(lookNow, "0.00") + "," + F(mYaw, "0.00") + "," + F(mNod, "0.00") + "," + mMouth + "," + F(mbl, "0.00") + "," + F(mLook, "0.00") + "," + robotIn + "," + F(chair.position.x - O.x) + "," + F(Mathf.DeltaAngle(180f, chair.eulerAngles.y), "0.000") + "," + F(nr.position.x - O.x) + "," + F(Mathf.DeltaAngle(180f, nr.eulerAngles.y), "0.000") + "," + F(mToRobot, "0.00") + "," + F(frNow) + "," + F((rz + rs.minZ) - ob.nurseFarZ)); // ---------- 依頼230:真上の画面の位置(車いすの後ろの車軸の真ん中・ハコブくんの根)と、画面の中か { SetTop230(dir.cam, topJs, O); Func px = w => { Vector3 vp = dir.cam.WorldToViewportPoint(w); return new Vector2(vp.x * W, (1f - vp.y) * H); }; Func inV = w => { Vector3 vp = dir.cam.WorldToViewportPoint(w); return vp.x >= 0f && vp.x <= 1f && vp.y >= 0f && vp.y <= 1f; }; Vector3 axle = chair.TransformPoint((hubL0 + hubR0) * 0.5f); axle.y = 0f; Vector3 rRoot = dir.robot.position; rRoot.y = 0f; Vector2 pa = px(axle), pr = px(rRoot); int cIn = 0, cAll = 0; foreach (var v in chairVertsLocal) { cAll++; if (inV(chair.TransformPoint(v))) cIn++; } int rIn = 0; foreach (var c4 in new[] { new Vector3(rs.minX, 0f, rs.minZ), new Vector3(rs.maxX, 0f, rs.minZ), new Vector3(rs.minX, 0f, rs.maxZ), new Vector3(rs.maxX, 0f, rs.maxZ) }) if (inV(dir.robot.TransformPoint(c4))) rIn++; int nIn = 0; foreach (var hb in bonesList) if (inV(an.GetBoneTransform(hb).position)) nIn++; topCsv.AppendLine(f + "," + F(t, "0.000") + "," + F(axle.x - O.x, "0.00000") + "," + F(axle.z - O.z, "0.00000") + "," + F(pa.x, "0.000") + "," + F(pa.y, "0.000") + "," + F(rRoot.x - O.x, "0.00000") + "," + F(rRoot.z - O.z, "0.00000") + "," + F(pr.x, "0.000") + "," + F(pr.y, "0.000") + "," + (cIn == cAll ? 2 : cIn > 0 ? 1 : 0) + "," + (rIn == 4 ? 2 : rIn > 0 ? 1 : 0) + "," + (nIn == bonesList.Count ? 2 : nIn > 0 ? 1 : 0)); if (f == 0) { // 床の点から画面の位置への写し方(正射影なので 3 点で決まる) var cj = new StringBuilder("{\n"); cj.AppendLine(string.Format(IC, " \"center_x\": {0}, \"center_z\": {1}, \"height\": {2}, \"ortho_size\": {3}, \"aspect\": {4:0.000000}, \"orthographic\": {5},", topJs["center_x"].F(), topJs["center_z"].F(), topJs["height"].F(), topJs["ortho_size"].F(), dir.cam.aspect, dir.cam.orthographic ? "true" : "false")); var p00 = px(O); var p10 = px(O + Vector3.right); var p01 = px(O + Vector3.forward); cj.AppendLine(string.Format(IC, " \"px_origin\": [{0:0.0000}, {1:0.0000}], \"px_per_x\": [{2:0.0000}, {3:0.0000}], \"px_per_z\": [{4:0.0000}, {5:0.0000}],", p00.x, p00.y, p10.x - p00.x, p10.y - p00.y, p01.x - p00.x, p01.y - p00.y)); cj.AppendLine(string.Format(IC, " \"chair_axle_local\": [{0:0.00000}, {1:0.00000}, {2:0.00000}]", ((hubL0 + hubR0) * 0.5f).x, ((hubL0 + hubR0) * 0.5f).y, ((hubL0 + hubR0) * 0.5f).z)); cj.AppendLine("}"); File.WriteAllText(Path.Combine(outDir, "top237_cam.json"), cj.ToString(), new UTF8Encoding(false)); } } // ---------- 撮る bool inRange = t >= fromT - 1e-4f && t <= toT + 1e-4f; { var ffk = C["ff"]; int spd = C["ff_speed"].I(4); for (int k = 0; ffk != null && k < ffk.Count; k++) { int a0 = Mathf.RoundToInt(ffk[k][0].F() * fps), a1 = Mathf.RoundToInt(ffk[k][1].F() * fps); if (f > a0 && f < a1 && (f - a0) % spd != 0) inRange = false; // 依頼235:早回しの所は使うコマだけ撮る } } if ((vMain || vTop) && f >= vFrom && f <= vTo && inRange) { syncProxies(); scaleMouth(); scaleMouthT(); if (vMain) { SetCam(dir.cam, shot["cameras"][camName], O, dir); SavePng(Shoot(dir.cam, W, H, SS), Path.Combine(fdirM, string.Format("f_{0:00000}.png", f))); } if (vTop) { SetTop230(dir.cam, topJs, O); SavePng(Shoot(dir.cam, W, H, SS), Path.Combine(fdirT, string.Format("f_{0:00000}.png", f))); } if (vTop) { // 依頼232:体だけの型(同じ真上のカメラ・同じ大きさ) var body = BodyRenderers(new[] { dir.robot, chair, mor, proxyRoot, dir.nurse.transform, proxyRootT, teraN.transform }); if (!log.ToString().Contains("依頼232 体の型")) LogRenderers232(body, log); SavePng(ShootMask(dir.cam, body, W, H, SS), Path.Combine(fdirT + "_mask", string.Format("f_{0:00000}.png", f))); // 依頼234:もの別の型(赤=ハコブくん・緑=車いすと茂さん・青=大城さん) var grp = new List[4]; for (int g = 0; g < 4; g++) grp[g] = new List(); foreach (var rd in body) grp[(rd.transform.IsChildOf(proxyRootT) || rd.transform.IsChildOf(teraN.transform)) ? 3 : Group234(rd, dir.robot, chair, mor)].Add(rd); if (!log.ToString().Contains("依頼234 もの別")) { log.AppendLine("依頼234 もの別の型の部品"); string[] gn = { "赤 ハコブくん", "緑 車いすと茂さん", "青 大城さん", "アルファ 寺島さん" }; for (int g = 0; g < 4; g++) { log.Append(" " + gn[g] + " " + grp[g].Count + ":"); foreach (var rd in grp[g]) log.Append(" " + rd.name); log.AppendLine(); } } var obj = new Texture2D(W, H, TextureFormat.RGBA32, false); var px = new Color32[W * H]; for (int g = 0; g < 4; g++) { var m = ShootMask(dir.cam, grp[g], W, H, SS); var mp = m.GetPixels32(); for (int i = 0; i < px.Length; i++) { if (g == 0) px[i].r = mp[i].r; else if (g == 1) px[i].g = mp[i].r; else if (g == 2) px[i].b = mp[i].r; else px[i].a = mp[i].r; } UnityEngine.Object.DestroyImmediate(m); } obj.SetPixels32(px); obj.Apply(); SavePng(obj, Path.Combine(fdirT + "_obj", string.Format("f_{0:00000}.png", f))); } } for (int s = 0; stillsOn && s < (stills != null ? stills.Count : 0); s++) { if (Mathf.RoundToInt(stills[s][0].F() * fps) != f) continue; syncProxies(); scaleMouth(); scaleMouthT(); if (stills[s][1].S() == "top") SetTop230(dir.cam, topJs, O); else SetCam(dir.cam, shot["cameras"][stills[s][1].S()], O, dir); string sn = stills[s][2].S(); string sd = Path.Combine(outDir, sn.StartsWith("chk_") ? "stills_check" : "stills"); Directory.CreateDirectory(sd); SavePng(Shoot(dir.cam, W, H, SS), Path.Combine(sd, sn + ".png")); } } File.WriteAllText(Path.Combine(outDir, "frames237.csv"), csv.ToString(), new UTF8Encoding(false)); File.WriteAllText(Path.Combine(outDir, "top237.csv"), topCsv.ToString(), new UTF8Encoding(false)); File.WriteAllText(Path.Combine(outDir, "bones237.csv"), bonesCsv.ToString(), new UTF8Encoding(false)); File.WriteAllText(Path.Combine(outDir, "feet237.csv"), feetCsv.ToString(), new UTF8Encoding(false)); File.WriteAllText(Path.Combine(outDir, "wc237.csv"), wcCsv.ToString(), new UTF8Encoding(false)); tab.AppendLine("■ " + shotName); tab.AppendLine(string.Format(IC, "見つけた\t{0:0.000} 秒(前の端とのあいだ {1:0.000} m)", seenT, seenGap)); tab.AppendLine(string.Format(IC, "決まりに当たった\t{0:0.000} 秒・前の端とのあいだ {1:0.000} m < {2:0.000} m(自分が止まるまで {3:0.000} m・{4:0.000} 秒+相手の進む分+余り {5:0.000})・ふだんの位置のすき間の予想 {6:0.000} m・寄った位置 {7:0.000} m → {8}", trigT, trigGap, trigNeed, trigDm, trigTm, R.margin, trigGapLane, trigGapWall, trigT >= 0f ? "止まる" : "-")); tab.AppendLine(string.Format(IC, "減速の始まり・寄り終わり・止まった\t{0:0.000}・{1:0.000}・{2:0.000} 秒(止まった時の足のせの前の端とのあいだ {3:0.000} m・位置 x {4:0.0000} z {5:0.0000}・向き {6:0.000}°)", decelT, latDoneT, stopT, stopFrontGap, stopPos.x - O.x, stopPos.z - O.z, stopYaw)); tab.AppendLine(string.Format(IC, "走り出し\t{0:0.000} 秒(看護師の体とハコブくんの後ろの端 {1:0.000} m・物全体 {2:0.000} m)・画面の外 {3:0.000} 秒", resumeT, nurseBehindAtResume, behindAtResume, exitT)); tab.AppendLine(string.Format(IC, "止まっている間の動き\t{0:0.0000} m({1} コマ)", stopMove, stopFrames)); tab.AppendLine(string.Format(IC, "ハコブくんの速さ\t{0:0.0000}〜{1:0.0000} m/秒・加速度 {2:0.000}〜{3:0.000} m/秒²・横の位置 {4:0.000}〜{5:0.000} m・向きの最大 {6:0.00}°", vMin, vMax, aMin, aMax, xMinR, xMaxR, yawMaxR)); tab.AppendLine(string.Format(IC, "当たったコマ\tハコブくんと(車いす・茂さん・看護師){0}・車いす/茂さんと壁/手すり/扉 {1}({2})・ハコブくんと壁/手すり/扉 {3}({4})・看護師と車いす {5}・手が握りの中 {6}({7})・看護師と壁/手すり/扉 {8}({9})", hitRG, hitCS, hitCSWhere, hitRS, hitRSWhere, hitNC, hitHandGrip, hitNCWhere, hitNS, hitNSWhere)); tab.AppendLine(string.Format(IC, "ハコブくんと物の一番近い距離\t{0:0.000} m({1:0.000} 秒・{2})・前後が重なる間(すれ違う時)の最小 {3:0.000} m({4:0.000} 秒)", gapMin, gapMinT, gapMinWhere, gapPassMin, gapPassMinT)); tab.AppendLine(string.Format(IC, "手すりとのすき間\tハコブくん 最小 {0:0.000} m・止まっている間 {1}・車いす/茂さん 最小 {2:0.000} m(手すり)・{3:0.000} m(壁/扉を含む)・看護師 {4:0.000} m", robotRailMin, robotRailMinStop < float.MaxValue ? F(robotRailMinStop, "0.000") + " m" : "-", chairRailMin, chairSolidMin, nurseSolidMin)); tab.AppendLine(string.Format(IC, "看護師と車いすの頂点の一番近い所(手を除く・高さ 0.6 m より下・参考)\t{0:0.0000} m({1})", nurseWheelMin, nurseWheelWhere)); tab.AppendLine(string.Format(IC, "手と握り\t手のひらの中心と握りの面の距離 {0:0.0000}〜{1:0.0000} m(最大 {2:0.000} 秒)・手のひらの的とのずれの最大 {3:0.0000} m({4:0.000} 秒)", palmGripMin, palmGripMax, palmGripMaxT, palmTargetErrMax, palmTargetErrT)); tab.AppendLine(string.Format(IC, "手の頂点と握りの面\t一番近い {0:0.0000} m(負は中・{1})", handGripMin, handGripWhere)); tab.AppendLine(string.Format(IC, "車いす\t根の高さのずれ {0:0.00000} m・後ろの車輪の下 {1:0.00000}〜{2:0.00000} m・前の車輪の下 {3:0.00000}〜{4:0.00000} m・後ろの車輪の横すべり {5:0.00000} m/コマ・前の車輪の横すべり {6:0.00000} m/コマ・前の車輪の向きの最大 {7:0.00}°", chairYErr, tireYMin, tireYMax, cTireYMin, cTireYMax, wheelSlipMax, casterSlipMax, casYawMax)); tab.AppendLine(string.Format(IC, "足(看護師)\t歩く所 {0} コマ・すべり最大 {1:0.00} cm({2:0.000} 秒)・沈み {3:0.00} cm({4:0.000})・両足とも浮いた {5:0.00} cm({6:0.000})", walkFrames, slideMax * 100f, slideMaxT, sinkMax * 100f, sinkMaxT, floatMax * 100f, floatMaxT)); tab.AppendLine(string.Format(IC, "1 コマの骨の動き\t看護師 根の動きを除いた最大 {0:0.00} cm({1}・{2:0.000} 秒)・世界の最大(参考){3:0.00} cm({4}・{5:0.000} 秒)・茂さん(車いすから){6:0.00} cm({7}・{8:0.000} 秒)", jumpR * 100f, jumpRB, jumpRT, jumpW * 100f, jumpWB, jumpWT, mJump * 100f, mJumpB, mJumpT)); tab.AppendLine(string.Format(IC, "目線\t大城さん:見る間の顔の向きと画面への向きの角度 平均 {0:0.00}°・一番大きい {1:0.00}°({2:0.000} 秒)・{3} コマ/茂さん:顔の向き 最大 {4:0.0}°・うなずき {5:0.0}°・向けている間の画面への角度の最小 {6:0.0}°({7:0.000} 秒)", lookN > 0 ? lookSum / lookN : 0f, lookWorst, lookWorstT, lookN, mYawMax, mNodMax, mLookBest, mLookBestT)); tab.AppendLine(string.Format(IC, "車いすの横の位置(根)\t始め x {0:0.0000}・寄せ始め({1:0.000} 秒)x {2:0.0000}・寄せ終わり({3:0.000} 秒)x {4:0.0000}・すれ違う間 x {5:0.0000}〜{6:0.0000}", chairX0, shT0, chairXsh0, shT1, chairXsh1, chairXpassMin, chairXpassMax)); tab.AppendLine(string.Format(IC, "車いすの向き・横の速さ\t向きの最大 {0:0.000}°({1:0.000} 秒)・横の速さの最大 根 {2:0.0000} m/秒({3:0.000})・足のせの前の端 {4:0.0000} m/秒({5:0.000})", chairYawMax, chairYawMaxT, chairLatV, chairLatVT, frontLatV, frontLatVT)); tab.AppendLine(string.Format(IC, "前の端が並んだ\t{0:0.000} 秒(車いすの根 x {1:0.0000}・すき間 {2:0.000} m)・寄せ終わりとの差 {3:0.000} 秒", alignT, alignChairX, alignGap, alignT - shT1)); tab.AppendLine(gapPreShift < 1.5f ? string.Format(IC, "寄せ始める前のすき間の最小\t{0:0.000} m({1:0.000} 秒)", gapPreShift, gapPreShiftT) : "寄せ始める前のすき間の最小\t1.5 m より遠い"); tab.AppendLine(string.Format(IC, "寄せる間({0:0.000}〜{1:0.000} 秒)\t手のひらの的とのずれ最大 {2:0.0000} m・手のひらの中心と握りの面 {3:0.0000}〜{4:0.0000} m・後ろの車輪の横すべり {5:0.00000} m/コマ・前の車輪の横すべり {6:0.00000} m/コマ・前の車輪の向きの最大 {7:0.00}°・足のすべり最大 {8:0.00} cm", shT0, shT1, shPalmErr, shPalmGripMin, shPalmGripMax, shWheelSlip, shCasterSlip, shCasYaw, shSlide * 100f)); tab.AppendLine(string.Format(IC, "前の車輪の向きの最大(全体)\t{0:0.00}°({1:0.000} 秒)", casYawMax, casYawMaxT)); tab.AppendLine("■ 依頼235 の確かめ"); tab.AppendLine(string.Format(IC, "寄せる道({0:0.000}〜{1:0.000} 秒)\t車いすの向きの最大 {2:0.00}°・後ろの車軸の速さの最大 {3:0.0000} m/秒({4:0.000} 秒)・向きの変わる速さの最大 {5:0.00}°/秒({6:0.000} 秒)・前へ進んだ距離 {7:0.0000} m・後ろへ下がった距離 {8:0.0000} m(寄せ始めの車軸から)", shT0, shT1, manYawMax, manV, manVT, manW, manWT, manFwd, manBack)); tab.AppendLine(string.Format(IC, "足のせの前の端とハコブくんの前の端(止まってから走り出すまで)\t最小 {0:0.0000} m({1:0.000} 秒)", footRobotMin, footRobotMinT)); tab.AppendLine(string.Format(IC, "大城さん\t体の向き(車いすから)の最大 {0:0.00}°({1:0.000} 秒)・顔の向き(体から・片手の間)の最大 {2:0.00}°({3:0.000} 秒)・寺島さんの目への角度の最小 {4:0.0}°・右手をはなした {5:0.000} 秒・握り直した {6:0.000} 秒・車いすが根に固い時のずれ {7:0.00000}", oBodyRelMax, oBodyRelMaxT, oHeadMaxTalk, oHeadMaxTalkT, oLookTeraMin, relT, regripT, rigidErr)); tab.AppendLine(string.Format(IC, "寺島さん\t顔の向きの最大 {0:0.00}°({1:0.000} 秒)・下がった距離 {2:0.0000} m({3:0.000}〜{4:0.000} 秒)・当たったコマ 壁/手すり {5}・大城さん {6}・車いす {7}({8})", tHeadMax, tHeadMaxT, teraRetDist, teraRetT0, teraRetT1, hitTS, hitTO, hitTC, hitTWhere)); tab.AppendLine(string.Format(IC, "走り出し(依頼235 の決まり)\t{0:0.000} 秒・止まってから {1:0.000} 秒・寄った位置のすき間 {2:0.000} m・物の一番後ろを通り過ぎた {3:0.000} 秒", resumeT, resumeT - stopT, resumeGapWall, passedT)); tab.AppendLine(string.Format(IC, "ハコブくんが通る時(走り出し後)のすき間の最小\t車いす {0:0.000} m({1:0.000} 秒)・茂さん {2:0.000} m({3:0.000})・大城さん {4:0.000} m({5:0.000})・寺島さん {6:0.000} m({7:0.000})", passMin["車いす"], passMinT["車いす"], passMin["茂さん"], passMinT["茂さん"], passMin["看護師"], passMinT["看護師"], passMin["寺島さん"], passMinT["寺島さん"])); tab.AppendLine("■ 依頼237 の確かめ"); tab.AppendLine(string.Format(IC, "ハコブくんが車いすの横にいる間\t{0:0.000}〜{1:0.000} 秒(前の端が足のせの前の端を過ぎてから、後ろの端が大城さんの後ろの端を過ぎるまで)", besideT0, besideT1)); tab.AppendLine("看護師と車いすが当たったコマの時刻\t" + string.Join("・", ncTimes.ToArray())); tab.AppendLine("茂さんのまばたき\t" + string.Join("・", mBlinks.ConvertAll(x => x.ToString("0.000", IC)).ToArray())); tab.AppendLine("大城さんのまばたき\t" + string.Join("・", dir.Blinks.ConvertAll(x => x.ToString("0.000", IC)).ToArray())); tab.AppendLine("画面の変わり目\t" + string.Join("/", scrChanges.ToArray())); foreach (var e in dir.events) log.AppendLine(" " + e); } catch (Exception e) { Debug.LogError(e); log.AppendLine("エラー: " + e); } File.WriteAllText(Path.Combine(outDir, "check237.txt"), tab.ToString(), new UTF8Encoding(false)); File.WriteAllText(Path.Combine(outDir, "events237.txt"), log.ToString(), new UTF8Encoding(false)); Debug.Log("[C237] done\n" + log + "\n" + tab); } /// 依頼229:茂さん・車いすの読み込みの設定が 228 のままかを確かめるだけ(Models/ に書かない)。違えば止める static void CheckImport(StringBuilder sb) { foreach (var p in new[] { Closeup228Morita.MoritaFbx, Closeup228Morita.ChairFbx }) { var mi = (ModelImporter)AssetImporter.GetAtPath(p); if (mi == null) throw new Exception("FBX が無い: " + p); bool morita = p == Closeup228Morita.MoritaFbx; var at = morita ? ModelImporterAnimationType.Generic : ModelImporterAnimationType.None; bool ok = mi.animationType == at && mi.isReadable && !mi.importAnimation && mi.materialImportMode == ModelImporterMaterialImportMode.ImportStandard && (!morita || mi.avatarSetup == ModelImporterAvatarSetup.NoAvatar) && mi.GetExternalObjectMap().Count > 0; sb.AppendLine(Path.GetFileName(p) + ":Rig " + mi.animationType + "・材質の割り当て " + mi.GetExternalObjectMap().Count + " 個・228 の設定のまま " + (ok ? "はい" : "いいえ")); if (!ok) throw new Exception("読み込みの設定が 228 と違う(Models/ は変えない決まりなので止める): " + p); } } static string HandCat(Transform b, Dictionary map) { for (var t = b; t != null; t = t.parent) { HumanBodyBones hb; if (!map.TryGetValue(t, out hb)) continue; string s = hb.ToString(); if (hb == HumanBodyBones.LeftHand || (s.StartsWith("Left") && (s.Contains("Thumb") || s.Contains("Index") || s.Contains("Middle") || s.Contains("Ring") || s.Contains("Little")))) return "左手"; if (hb == HumanBodyBones.RightHand || (s.StartsWith("Right") && (s.Contains("Thumb") || s.Contains("Index") || s.Contains("Middle") || s.Contains("Ring") || s.Contains("Little")))) return "右手"; return ""; } return ""; } static Texture2D ScreenTex(string path) { var ti = (TextureImporter)AssetImporter.GetAtPath(path); if (ti == null) throw new Exception("絵が無い: " + path); if (ti.textureCompression != TextureImporterCompression.Uncompressed || ti.maxTextureSize < 2048 || ti.npotScale != TextureImporterNPOTScale.None || !ti.alphaIsTransparency || !ti.mipmapEnabled || ti.wrapMode != TextureWrapMode.Clamp || !ti.sRGBTexture) { ti.textureCompression = TextureImporterCompression.Uncompressed; ti.maxTextureSize = 2048; ti.npotScale = TextureImporterNPOTScale.None; ti.alphaIsTransparency = true; ti.mipmapEnabled = true; ti.wrapMode = TextureWrapMode.Clamp; ti.sRGBTexture = true; ti.filterMode = FilterMode.Trilinear; ti.anisoLevel = 4; ti.SaveAndReimport(); } var tx = AssetDatabase.LoadAssetAtPath(path); if (tx == null) throw new Exception("絵が読めない: " + path); return tx; } static Texture2D PrepTex(string path, string like) { var tx = AssetDatabase.LoadAssetAtPath(path); if (tx == null) throw new Exception("絵が無い: " + path); return tx; } static string CutAt(JsonValue shot, float t) { var c = shot["cuts"]; string name = c[0][1].S(); for (int i = 0; i < c.Count; i++) if (c[i][0].F() <= t + 1e-4f) name = c[i][1].S(); return name; } /// カメラ:pos・look は廊下の原点から。follow が "robot" なら z をハコブくんの z から、"nurse" なら看護師の根の z から static void SetCam(Camera cam, JsonValue C, Vector3 O, CloseupDirector dir) { if (C == null || C.IsNull) throw new Exception("台本にカメラが無い"); cam.orthographic = false; cam.ResetAspect(); // 依頼230:真上のカメラ(正射影・横縦比を決めた)の後でも 229 のまま Vector3 add = Vector3.zero; string fo = C["follow"].S(""); if (fo == "robot") add = new Vector3(0f, 0f, dir.robot.position.z - O.z); else if (fo == "nurse") add = new Vector3(0f, 0f, dir.nurse.transform.position.z - O.z); if (fo == "nurse_xz") { // 依頼229:大城さんの根の位置と向きから(向き 180°の時の置き方を、根の向きの分だけ回す) Transform nt = dir.nurse.transform; Quaternion q = Quaternion.Euler(0f, nt.eulerAngles.y - 180f, 0f); Vector3 np = new Vector3(nt.position.x, 0f, nt.position.z); cam.transform.position = np + q * CloseupDirector.V3(C["pos"]); cam.transform.rotation = Quaternion.LookRotation((np + q * CloseupDirector.V3(C["look"])) - cam.transform.position, Vector3.up); cam.fieldOfView = C["fov"].F(40f); return; } cam.transform.position = O + add + CloseupDirector.V3(C["pos"]); Vector3 up = C.Has("up") ? CloseupDirector.V3(C["up"]) : Vector3.up; cam.transform.rotation = Quaternion.LookRotation((O + add + CloseupDirector.V3(C["look"])) - cam.transform.position, up); cam.fieldOfView = C["fov"].F(40f); } /// 依頼230:動かない真上のカメラ(正射影)。center_x・center_z(廊下の原点から)・height(床から)・ortho_size(画面の高さの半分 m)。画面の上が −x・右が +z static void SetTop230(Camera cam, JsonValue T, Vector3 O) { cam.orthographic = true; cam.orthographicSize = T["ortho_size"].F(); cam.transform.position = O + new Vector3(T["center_x"].F(), T["height"].F(), T["center_z"].F()); cam.transform.rotation = Quaternion.LookRotation(Vector3.down, Vector3.left); cam.nearClipPlane = 0.3f; cam.farClipPlane = T["height"].F() + 5f; cam.aspect = T["width_px"].F(1920f) / T["height_px"].F(1080f); } static Camera maskCam232; static Material white232; /// 依頼232:写る体の部品(ハコブくん・車いす・茂さん・大城さんと、写しの部品)。その時に写る物だけ static List BodyRenderers(Transform[] roots) { var list = new List(); foreach (var r in roots) foreach (var rd in r.GetComponentsInChildren(false)) if (rd.enabled && rd.gameObject.activeInHierarchy && !list.Contains(rd)) list.Add(rd); return list; } /// 依頼234:部品がどのものか(0=ハコブくん・1=車いすと茂さん・2=大城さん)。茂さんの写しの部品は名前が Morita_ で始まる static int Group234(Renderer rd, Transform robot, Transform chair, Transform mor) { var t = rd.transform; if (t.IsChildOf(robot)) return 0; if (t.IsChildOf(chair) || t.IsChildOf(mor) || rd.name.StartsWith("Morita_")) return 1; return 2; } /// 依頼232:体に数えた部品と、数えなかった部品(廊下など)を書く static void LogRenderers232(List body, StringBuilder log) { log.AppendLine("依頼232 体の型に入れた部品 " + body.Count + ":"); foreach (var r in body) log.AppendLine(string.Format(IC, " 体 {0}(層 {1}・高さ {2:0.000}〜{3:0.000} m)", r.name, r.gameObject.layer, r.bounds.min.y, r.bounds.max.y)); int n = 0; foreach (var r in UnityEngine.Object.FindObjectsOfType()) { if (!r.enabled || !r.gameObject.activeInHierarchy || body.Contains(r)) continue; n++; if (n <= 60) log.AppendLine(string.Format(IC, " 入れない {0}(層 {1}・高さ {2:0.000}〜{3:0.000} m)", r.name, r.gameObject.layer, r.bounds.min.y, r.bounds.max.y)); if (r.gameObject.layer == LayerMask232) throw new Exception("層 " + LayerMask232 + " を使っている部品がある:" + r.name); } log.AppendLine(" 入れない部品 " + n); } /// 依頼232:体だけを白く写した型(黒=床など・白=体)。真上のカメラ(cam)を写した別のカメラで撮る。cam と部品は元のまま残す static Texture2D ShootMask(Camera cam, List body, int W, int H, int SS) { if (maskCam232 == null) { var g = new GameObject("MaskCam232"); maskCam232 = g.AddComponent(); maskCam232.enabled = false; white232 = new Material(Shader.Find("Unlit/Color")) { name = "Mask232" }; white232.color = Color.white; } maskCam232.CopyFrom(cam); maskCam232.cullingMask = 1 << LayerMask232; maskCam232.clearFlags = CameraClearFlags.SolidColor; maskCam232.backgroundColor = Color.black; maskCam232.allowHDR = false; maskCam232.allowMSAA = false; var layers = new int[body.Count]; var mats = new Material[body.Count][]; var mpbs = new MaterialPropertyBlock[body.Count]; var hadMpb = new bool[body.Count]; for (int i = 0; i < body.Count; i++) { layers[i] = body[i].gameObject.layer; mats[i] = body[i].sharedMaterials; hadMpb[i] = body[i].HasPropertyBlock(); if (hadMpb[i]) { mpbs[i] = new MaterialPropertyBlock(); body[i].GetPropertyBlock(mpbs[i]); body[i].SetPropertyBlock(null); } body[i].gameObject.layer = LayerMask232; var w = new Material[Mathf.Max(1, mats[i].Length)]; for (int k = 0; k < w.Length; k++) w[k] = white232; body[i].sharedMaterials = w; } try { return Shoot(maskCam232, W, H, SS); } finally { for (int i = 0; i < body.Count; i++) { body[i].gameObject.layer = layers[i]; body[i].sharedMaterials = mats[i]; if (hadMpb[i]) body[i].SetPropertyBlock(mpbs[i]); } } } static Texture2D Shoot(Camera cam, int W, int H, int SS) { var big = RenderTexture.GetTemporary(W * SS, H * SS, 24, RenderTextureFormat.ARGB32, RenderTextureReadWrite.Default); var small = RenderTexture.GetTemporary(W, H, 0, RenderTextureFormat.ARGB32, RenderTextureReadWrite.Default); big.filterMode = FilterMode.Bilinear; cam.targetTexture = big; cam.Render(); cam.targetTexture = null; Graphics.Blit(big, small); var prev = RenderTexture.active; RenderTexture.active = small; var tex = new Texture2D(W, H, TextureFormat.RGB24, false); tex.ReadPixels(new Rect(0, 0, W, H), 0, 0); tex.Apply(); RenderTexture.active = prev; RenderTexture.ReleaseTemporary(big); RenderTexture.ReleaseTemporary(small); return tex; } static void SavePng(Texture2D tex, string path) { File.WriteAllBytes(path, tex.EncodeToPNG()); UnityEngine.Object.DestroyImmediate(tex); } } }